42 EN CONDUCTING A VIDEO CONFERENCE OVER THE INTERNET (cont.)

Using Windows® Messenger (Windows® XP Only)

If you are using a Windows® XP, you can use Windows® Messenger to conduct video conferences over the Internet, using a camcorder.

Preparation

1Confirm that Windows® Messenger® 4.6 or later is installed.

●You can download the latest version of Windows® Messenger from Microsoft’s web site: http://www.microsoft.com/

2Connect to the Internet and set up Windows® Messenger.

●Start Windows® Messenger and register your e-mail address and other information. For details, refer to the Windows® Messenger help.

3Install [USB Video Streaming driver].

●Refer to “Software Installation (Windows®)” ( pg. 5) in the Software Installation and USB Connection Guide.

●If the installation of [USB Video Streaming driver] has already been completed, go to step 4.

4Connect the camcorder to the PC with a USB cable.

●Refer to “Connections (Windows®)” ( pg. 9) in the Software Installation and USB Connection Guide.

5Set the camcorder to the memory card recording mode.

The camcorder is now on.

“” appears on the camcorder’s LCD monitor.

●If “” does not appear, install [USB Video Streaming driver]. Refer to “Software Installation (Windows®)” ( pg. 5) in the Software Installation and USB Connection Guide.

NOTE:

The procedure is different when reading or writing a memory card.

6In the main screen of Windows® Messenger, click [Tools] and then select [Audio and Video Tuning Wizard…].

7Select [JVC PIX-MCV Video Capture] and then click [Next].

●Make sure that the image from the camcorder is displayed.

8Click [Next]. In the microphone setting, specify [JVC PIX-MCV Audio Capture]. In the speaker setting, specify the sound board that you are using.

●If you specify [JVC PIX-MCV Audio Capture] for the microphone setting, you cannot select [Use headphones].

9Click [Next]. Check the speaker or headphone volume.

●Click [Test] and check for sound from your speakers or headphones.

10Click [Next]. Check the microphone volume.

●The microphone volume is automatically adjusted. Speak into the camcorder microphone and check the microphone volume level so that the green bar extends into the yellow range.

11Click [Next] and exit the Wizard.