ADDING STILL IMAGES TO AN ALBUM (cont.) | EN 7 |
●When loading images from a memory card, never disconnect the USB cable while the message [ACCESSING FILES] is displayed in the camcorder’s LCD monitor.
●Digital Photo Navigator can only load still images. Digital Photo Navigator cannot load video clips.
7Click [Export].8Click [Album].The [Save As] dialog box appears.
9Specify the location where you want to save the album, enter the file name of the album, and then click [Save].
The album is saved.
●If you save an album for the first time after the software installation, a message appears and asks if you want to register the association of the file extension name “jia”. Then, click [Yes].
●To exit Digital Photo Navigator, refer to “EXITING DIGITAL PHOTO NAVIGATOR” (See below).
EXITING DIGITAL PHOTO NAVIGATOR1Click the [File] menu and then click [Exit].●If you have already saved an album, a confirmation message appears. Then, go to step 2.
●If you have not saved an album after loading still images, a confirmation message appears.
To save an album, click [Yes]. The [Save As] dialog box appears. Specify the location where you want to save the album, enter the file name of the album, and then click [Save]. A confirmation message appears. Then, go to step 2.
To exit Digital Photo Navigator without saving an album, click [No]. A confirmation message appears. Then, go to step 2.
2Click [Yes].Digital Photo Navigator closes.