Set “REC MODE” to “SP” or “LP”. ( pg. 41)
52 EN EDITING
Dubbing To Or From A Video Unit

To use this camcorder as a player

1 Make sure all units are turned off.

Equipped With A DV Connector

2 Connect this camcorder to a video unit

(Digital Dubbing)

equipped with a DV input connector using a DV

 

cable as shown in the illustration.

It is also possible to copy recorded scenes from

3 Start playback on the camcorder. ( pg. 22)

the camcorder onto another video unit equipped

4 At the point you want to start dubbing, start

with a DV connector. Since a digital signal is

sent, there is little if any image or sound

recording on the video unit. (Refer to the video

deterioration.

unit’s instruction manual.)

 

5 To stop dubbing, stop recording on the video

 

unit, then stop playback on this camcorder.

 

NOTES:

To DV IN/OUT

Core filter

DV cable (optional)

To DV IN/OUT

Video unit equipped with DV connector

●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 15)

●If a blank portion or disturbed image is played back on the player during dubbing, the dubbing may stop so that an unusual image is not dubbed.

●Even though the DV cable is connected correctly, sometimes the image may not appear in step 4. If this occurs, turn off the power and make connections again.

●If “Playback Zoom” ( pg. 26) or “Playback Special Effects” ( pg. 26) is attempted or SNAPSHOT is pressed during playback, only the original playback image recorded on the tape is output from the DV IN/OUT connector.

●When using a DV cable, be sure to use the optional JVC VC-VDV204U DV cable.

To use this camcorder as a recorder

1 Make sure all units are turned off.

2 Connect this camcorder to a video unit equipped with a DV output connector using a DV cable as shown in the illustration.

3 Set the camcorder’s Power Switch to “PLAY”.

4

5 Press the Recording Start/Stop Button to engage the Record-Pause mode.

●The “ DV IN ” indication appears on the screen.

6 Start playback on the player.

7 At the point you want to start dubbing, press the Recording Start/Stop Button to start

dubbing. The indication rotates.

8 Press the Recording Start/Stop Button again

to stop dubbing. The indication stops rotating.

9 Press 8 to return to the normal playback mode.