64 ENCAUTIONS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

How To Handle A CD-ROM (GR-DF470/450
Dirty heads can cause the following
problems:

only)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Take care not to soil or scratch the mirror surface

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

(opposite to the printed surface). Do not write

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

anything or put a sticker on either the front or back

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

surface. If the CD-ROM gets dirty, gently wipe it

...No picture during playback.

with a soft cloth outward from the center hole.

...Blocks of noise appear during playback.

Do not use conventional disc cleaners or cleaning

...During recording or playback, the Head Clog

spray.

Warning indicator “ ” appears.

Do not bend the CD-ROM or touch its mirror

...Recording cannot be performed properly.

surface.

In such cases, use an optional cleaning

Do not store your CD-ROM in a dusty, hot or

cassette. Insert it and play back. If the cassette

humid environment. Keep it away from direct

is used more than once consecutively, damage

sunlight.

to the video heads may result. After the

 

 

 

About moisture condensation

camcorder plays back for about 20 seconds, it

stops automatically. Also refer to the cleaning

You have observed that pouring a cold liquid

cassette’s instructions.

into a glass will cause drops of water to form on

the glass’ outer surface. This same

If, after using the cleaning cassette, the

phenomenon occurs on the head drum of a

problems still exist, consult your nearest JVC

camcorder when it is moved from a cool place

dealer.

to a warm place, after heating a cold room,

Mechanical moving parts used to move the

under extremely humid conditions or in a place

video heads and video tape tend to become

directly subjected to the cool air from an air

dirty and worn out over time. In order to maintain

conditioner.

a clear picture at all times, periodic check-ups

Moisture on the head drum can cause severe

are recommended after using the unit for about

damage to the video tape, and can lead to

1,000 hours. For periodic check-ups please

internal damage to the camcorder itself.

consult your nearest JVC dealer.

 

 

 

 

Serious malfunctioning

If malfunctioning occurs, stop using the unit immediately and consult your local JVC dealer.

The camcorder is a microcomputer-controlled device. External noise and interference (from a TV, a radio, etc.) might prevent it from functioning properly. In such cases, first disconnect its power supply unit (battery pack, AC Adapter, etc.) and wait a few minutes and then re-connect it and proceed as usual from the beginning.