JVC LYT1495-001A Power, Charging the Battery Pack, While sliding BATT., remove the battery pack

Connect the AC adapter to the camera.

14 EN GETTING STARTED

Power

This camera’s 2-way power supply system lets you choose the most appropriate source of power. Do not use provided power supply units with other equipment.

Charging the Battery Pack

Power/Charge Lamp

Power Switch

Lock Button

To DC connector

Open the cover.

To AC outlet

AC Adapter

(ex. AP-V17E)

1 Set the power switch to OFF.

2 With the arrow on the battery pack pointing downward, push the battery pack slightly against the battery pack mount.

●If the battery mount cover is attached, remove it by sliding BATT.

3 Slide down the battery pack until it locks in place.

4

5 Connect the power cord to the AC adapter. (for AP-V14E only)

6 Plug the power cord into an AC outlet. The power/charge lamp on the camera blinks to indicate charging has started.

7 When the power/charge lamp goes out, charging is finished. Unplug the power cord from the AC outlet. Disconnect the AC adapter from the camera.

To detach the battery pack

While sliding BATT., remove the battery pack.

Required charging time

Battery pack	Charging time
BN-VF707U*	Approx. 1 hr. 30 min.
BN-VF714U	Approx. 2 hr. 40 min.
BN-VF733U	Approx. 5 hr. 40 min.
* Provided

BATT.

Battery Pack

Arrow

Battery Pack Mount