NOTES:
●If PowerDirector/PowerProducer/PowerDVD have already been installed on the PC, uninstall them before installing the provided software.
Video files captured with this camera can only be handled on the provided software. Please install and use the provided software (PowerDirector Express NE, PowerProducer 2 Gold NE, PowerDVD 5 NE).
●If you perform installation of a software that is already installed, uninstallation will start. In this case, perform the installation again after uninstallation is finished.
●Windows Messenger has to been closed during CyberLink DVD Solution installation. If it is running during installation, [Information] screen appears.
To close Windows Messenger:
1)While holding [Ctrl + Alt] key, click [Delete] key so that [Task Manager] appears.
2)Click [Processes] tab.
3)Select [msmsgs.exe].
4)Click [End process].
Connections (Windows®)
Connecting the USB cable
Connect the USB cable to copy still images and video files in a recording medium to the PC.
PC
To USB connector 
Camera
USB cable
To USB connector
1 To assure safety, make sure all units are turned off before making any connections.
2 Use the USB cable to connect the camera to the PC.
NOTES:
●It is recommended to use the AC Adapter as the power supply instead of the battery pack.
●When the USB cable is connected, turning on or off the camera causes malfunctions of the PC.
●Connect the camera directly to the PC, not through the hub.
●Do not use an extension USB cable.
– 13 –
