Turn on the camcorder, the VCR and the TV.
VIDEO PLAYBACK EN 23

1 Make sure all units are turned off.

Connections To A TV Or VCR 2

Connect the camcorder to a TV or VCR as shown in the illustration.

To AV

If using a VCR, go to step 3. If not, go to step 4.

3 Connect the VCR output to the TV input, referring to your VCR’s instruction manual.

4

connector 5 Set the VCR to its AUX input mode, and set the TV to its VIDEO mode.

or

6 Start playback on the camcorder.

 

 

( pg. 21)

 

 

 

Audio/Video cable

● Please set “16:9 OUTPUT” of Playback Menus

 

 

 

so that the image may suit your TV (16:9 TV or

 

 

 

(provided)

4:3 TV). ( pg. 34, 35)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

To choose whether or not the following

 

 

 

 

 

 

 

 

 

displays appear on the connected TV

 

 

 

 

 

 

 

 

 

● Date/Time

 

 

 

 

 

 

 

 

 

Set “DATE/TIME” to “ON” or “OFF” ( pg. 35).

 

 

 

 

 

 

 

 

 

Or, press DISPLAY on the remote control to turn

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

on/off the date indication.

 

 

 

 

 

 

 

 

TV

● Time Code

 

 

 

 

 

 

 

 

Set “TIME CODE” to “ON” or “OFF” ( pg. 35).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

● Indications other than date/time and time code

VCR

 

Set “ON SCREEN” to “OFF”, “LCD” or “LCD/TV”

 

 

 

 

 

 

 

 

 

( pg. 35).

RECORDING & PLAYBACK

1Yellow to VIDEO IN (Connect when your TV/ VCR has only A/V input connectors.)

2Red to AUDIO R IN*

3White to AUDIO L IN*

* Not required for watching still images only.

NOTES:

●It is recommended to use the AC Adapter as the power supply instead of the battery pack. ( pg. 13)

●To monitor the picture and sound from the camcorder without inserting a tape or memory card, set the camcorder’s Power Switch to“REC”, then set your TV to the appropriate input mode.

●Make sure you adjust the TV sound volume to its minimum level to avoid a sudden burst of sound when the camcorder is turned on.