36 EN FEATURES FOR RECORDING

LED Light

Live Slow

LED Light can be used to brighten the subject in the dark place during video recording or D.S.C. shooting.

LIGHT

LED Light

1 Press LIGHT repeatedly to change the setting.

The light is on always. ( appears.)

The light turns on automatically

when dark. ( appears.)

Turns off the light.

2 Press the Recording Start/Stop Button to start video recording or SNAPSHOT to shoot a still image.

NOTES:

●Be careful not to point the LED Light directly to eyes.

●If the light does not reach the subject when the LED Light setting is “ON”, the Night-Alive function will be activated, and makes it possible to shoot the subject brighter.

●Since subjects are shot at a reduced shutter speed when the LED Light setting is “ON”, they will appear slightly blurred.

This feature is useful for recording or playing back precious or hard-to-see moments at a slow speed. Sound is recorded and played back in real time.

1 Set the VIDEO/MEMORY Switch to “VIDEO”.

2 Set the Power Switch to “REC” or “PLAY”.

●If set to “REC”, the recording mode should be set to “M”. ( pg. 20)

3 Set “SNAP/SLOW” to “SLOW”. ( pg. 33) The Live Slow indicator “ ” appears.

4 Press SLOW during recording or playback.

●The moving pictures are divided into four frames. They are recorded or played back for 1.5 seconds, and then normal recording or playback resumes.

NOTES:

●This feature is effective when the recording mode selection is set to both “A” or “M”.

●Live Slow cannot be used when the 16:9 Wide mode is selected.