30 EN ADDITIONAL FEATURES FOR D.S.C.

To Print By Selecting Still Images And

To Reset The Number Of Prints

Number Of Prints

 

 

 

 

 

 

 

 

 

 

1 Perform steps 1 – 3 in “To Print All Still

1 Perform steps 1 – 3 in “To Print All Still

Images (One Print For Each)” ( pg. 29).

Images (One Print For Each)” ( pg. 29).

2 Select “RESET”, press SET or 2. The

2 Select “CURRENT”,

 

 

 

 

DPOF screen appears.

press SET or 2. The DPOF

DPOF

 

3 Select “EXECUTE”, press SET.

 

SHEETS

 

screen appears.

 

 

● To cancel selection, select “RETURN”.

 

 

 

 

3 Press 1 or 2 to select

02

 

 

● The number of prints is reset to 0 for all still

 

 

 

images.

the desired file.

 

RETURN

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

CAUTION:

 

 

 

 

 

 

 

 

While performing the above, never disconnect

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

power, as this may cause the memory card to be

 

 

 

 

 

 

 

 

corrupted.

 

 

 

 

 

 

 

 

Select

4 Press 4 or 3 to select the number indication (00), and press SET.

5 Select the number of prints

1 Select

by pressing 3 to increase the

 

 

number, or 4 to decrease the

 

 

number, and press SET.

 

 

 

 

2 SET

● Repeat steps 3 through 5

DPOF

for the desired number of

 

SHEETS

prints.

 

●The number of prints can

be set up to 15.

 

02

● To correct the number of

 

prints, select the image

 

again and change the number.

 

NOTE:

When the image is printed from the printer, a black bar appears at the bottom of the screen. This is not a malfunction. By recording with “DIS” de-activated ( pg. 32) this can be avoided.

Initializing A Memory Card

You can initialize a memory card any time. After initializing, all files and data stored in the memory card, including those which have been protected, are cleared.

1 Perform steps 1 – 3 in “Normal Playback Of Images” ( pg. 27).

2 Press MENU.1 Select

3 Select “FORMAT”, press SET or 2. The FORMAT screen

6 Select “RETURN”, press SET. The “SAVE?” appears.

●If you did not change any settings in step 3 through 5, the DPOF Menu reappears.

DPOF

SAVE?

EXECUTE

CANCEL

appears.

● Press 1 whenever you want to

return to the previous menu

2 SET

screen.

 

4 Select “EXECUTE”,

FORMAT

press SET. The memory

 

ERASE ALL

card is initialized.

EXISTING DATA?

7 Select “EXECUTE”, press SET.

●To cancel selection, select “CANCEL”.

● When initialization is

EXECUTE

finished, “NO IMAGES

CANCEL

STORED” appears.

 

●To cancel initialization, select “RETURN”.