INSTALLATION
11.Example of a SCSI Cable Connection
When interconnecting the JVC CD/DVD Library and the host computer with a SCSI cable, use a
SCSI cable (of high impedance, shielded design)
External SCSI cable to host computer's
SCSI host adapter No.2 for controlling
the LibraryTo
| External SCSI cable to host computer's | To | |
| connector | ||
Host computer | SCSI host adapter No. 1 for controlling | ||
| |||
the Library | CD/DVD Library | ||
|
Attach the active terminator to the OUT connector.
ENGLISH
●An operational error may occur when the total length of the internal and external SCSI cables exceed 3 meters (with
●Regarding the length of the provided SCSI cable is approx. 1 m (3.3 feet).
●The length of the SCSI cable inside the JVC CD/DVD Library refer to “CONNECTING SCSI CABLES AND POWER CORD” in the operation manual for the main unit.
●Be sure to lock the connectors of the external SCSI cable once they are connected.
INSTALLATION PROCEDURE
Tighten until the dabs | 2Press the clamp filter against the connector | |
and fasten it with a provided band. | ||
are completely locked. | ||
|
Pull the band tightly. Cut off any extra length.
1Fit the clamp filter around the cable.
Signal disturbance may occur if a
PRECAUTIONS BEFORE USE
Read the following before installing this drive in your Library for the first time.
To mount this drive on the
For the ROM replacement method, consult your dealer or nearest
Do not set the Power switch of the CD/DVD Library to ON until all of the work described above has been completed.
7