Common Operations

Continued

Turning On or Off the Power

To turn on the unit, press STANDBY/ON (or on the unit) so that the STANDBY lamp goes off.

To turn off the unit (on standby), press

STANDBY/ON (or on the unit) again so that the STANDBY lamp lights up.

A little power is always consumed even while the unit is on standby.

To switch off the power supply completely, unplug the AC

power cord from the AC outlet.

When you unplug the AC power cord or if a power failure occurs

The clock is reset to “AM 12:00” right away, while the tuner preset stations (see page 13) will be erased in a few days.

Setting the Clock

Before operating the unit any further, first set the clock built in this unit. You can set the clock whether the unit is on or off.

On the remote control ONLY:1 Press CLOCK/TIMER.

The hour digits start flashing on the display.

2 Press ¢or 4to adjustthe hour, then press SET/RESUME.

The minute digits start flashing on the display.

•If you want to correct the hour after pressing SET/ RESUME, press CANCEL. The hour digits start flashing again.

3 Press ¢or 4to adjust the minute, then press SET/RESUME.
To check the clock time

Press DISPLAY while playing any source.

•To return to the source indication, press DISPLAY again.

While the time indication appears on the display

If you press a button or turn a control, the time indication returns to the source indication.

To adjust the clock again

1 Press CLOCK/TIMER repeatedly until “CLOCK” is selected.

•Each time you press the button, the clock/ timer setting modes change as follows:

DAILY ON TIME

Canceled CLOCK

2 Press SET/RESUME.

3Perform steps 2 and 3 of “Setting the Clock.”

When you unplug the AC power cord or if a power failure occurs

The clock loses the setting and is reset to “AM 12:00.” You need to set the clock again.

Selecting the Sources

To listen to the radio, press FM/AM. (See page 13.)

To play back CDs, press CD 6or CD1, CD2, CD3. (See pages 14 – 19.)

To select the external equipment as the source,

press AUX/USB. (See pages 8 and 9.)

When you press the play button for a particular source (FM/AM, CD 6, and AUX/USB), the unit turns on and the unit starts playing the source if it is ready.

•The selected source lamp lights up.

10