JVC MX-GC5 —ProgramPlay, Programming the Playing Order of the Tracks, To modify the program, 6 Press CD, 1 Load discs, On the remote control ONLY:

Continued

Programming the Playing Order of the Tracks

—Program Play

You can arrange the order in which the tracks play before you

start playing. You can program up to 32 tracks.

Program play is not available to MP3 discs on this unit

There may be a malfunction in case that you try to do such playback.

If a malfunction occurs, unplug the AC power cord and then plug it back in.

On the remote control ONLY:

1 Load discs.

•If the current playing source is not the CD player, press CD 6, then 7before going to the next step.

2 Press PROGRAM/RANDOM repeatedly until “PROGRAM” appears on the display.

The PROGRAM indicator also lights up on the display.

•If a program has been stored in memory, the program is called up.

3 Press one of the disc number buttons (CD1, CD2, and CD3) to select the

disc number you want to play.

•When the selected disc number is an MP3 disc, “MP3 DISC” appears on the display.

Disc number Program step number

Track number

4 Press the number button(s) to select the track number.

Ex.: For track number 5, press 5. For track number 20, press +10, then 10.

For track number 32, press +10, +10, +10, then 2.

Each time you select a track, the selected track number is added to the track number indicator.

•You can select up to the 99th track on each disc.

5 Program other tracks you want.

•To program tracks from the same disc, repeat step 4.

•To program tracks from a different disc, repeat steps 3 and 4.

6 Press CD 6.

The tracks are played in the order you have programmed.

To stop during play, press 7.

To exit from Program play, press 7during play or PROGRAM/RANDOM again before or after play.

The unit enters continuous playback. (The program you have made is stored in memory until you turn off the unit, open the carrousel, or erase the program.)

To modify the program

Before playing, you can erase the last programmed track shown on the display by pressing CANCEL.

•Each time you press the button, the last programmed track is erased from the program.

To add tracks in the program before play, simply select the disc numbers and/or track numbers you want to add by following steps 3 and 4 of the programming procedure.

To check the program before play, perform the following

procedure:

1Press PROGRAM/RANDOM while Program play is stopped.

2Press ¢or 4.

The programmed tracks appear on the display in the programmed (or reverse) order.

•Pressing CD 6starts Program play from the first track of the program.

If you want to add tracks in the program after checking the program

Press PROGRAM/RANDOM repeatedly until the PROGRAM indicator appears on the display, then add tracks by following steps 3 and 4 of the programming procedure.

To erase the entire program, press 7while Program play is stopped.

•Turning the power off or ejecting the carrousel will also erase the stored memory.

If you try to add another track when 32 tracks are already programmed

“FULL” appears on the display.

If you have programmed a track from an empty tray, or a track number that does not exist on the disc

Such program steps will be skipped and erased.

18