JVC MX-GC5 Using the Timers, Using Daily Timer, How Daily Timer actually works, 2 Press CLOCK/TIMER again, On the remote control ONLY:, CD, AUX IN, TUNER FM :, TUNER AM :

Using the Timers

Continued

There are two timers available—Daily Timer and Sleep	2 Press CLOCK/TIMER again.
Timer.
Before using the timers, you need to set the clock built in the	“ON TIME” appears for 1 second, then the
	unit enters on-time setting mode.
unit. (See “Setting the Clock” on page 10.)

Using Daily Timer

With Daily Timer, you can wake to your favorite music or radio program. You can set the timer whether the unit is on or off.

How Daily Timer actually works

The unit automatically turns on, set the volume level to the preset level, and starts playing the specified source when the on-time comes (the indicator flashes while the timer is operating). Then, when the off-time comes, the unit automatically turns off (on standby).

Daily Timer works everyday unless you cancel it.

•There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 1 again.

•If you have made a mistake while setting timer, press CANCEL. (However, this does not always work. If CANCEL does not work, press CLOCK/TIMER repeatedly and start from step 1 again.)

Before you start...

•When using the tuner as the source to play:

—Make sure to preset a station you want to play. (See page 13.)

•When using a disc as the source to play:

—Make sure there is a disc you want to play on the currently selected disc number tray.

•When using the external component as the source to play:

—Set the timer equipped with the external component at the same time.

On the remote control ONLY:

1 Press CLOCK/TIMER repeatedly until “DAILY” appears on the display.

The indicator lights up and the DAILY

(daily timer) indicator starts flashing on the display.

•Each time you press the button, the clock/timer setting modes change as follows:

DAILY ON TIME (Daily Timer)

Canceled CLOCK (See page 10.)

3 Set the on-time you want the unit to turn on.

1) Press ¢/¡or 4/1to set the hour, then SET/RESUME.

2)Press ¢/¡or 4/1to set the

minute, then SET/RESUME.

“OFF TIME” appears for 1 second, then the unit enters off-time setting mode.

4 Set the off-time you want the unit to turn off (on standby).

1)Press ¢/¡or 4/1to set the hour, then SET/RESUME.

2)Press ¢/¡or 4/1to set the

minute, then SET/RESUME.

The unit enters source selecting mode.

5 Press ¢/¡or 4/1 to select the source to play, then SET/RESUME.

•Each time you press ¢/¡or 4/1, the source changes as follows:

TUNER FMTUNER AM

AUX IN CD

TUNER FM : tunes in to a specified preset FM station.

=go to step 6.

TUNER AM : tunes in to a specified preset AM station.

	=go to step 6.
CD*	: plays a disc on a specified disc tray from
	the first track.
	=go to step 6.
AUX IN	: plays an external source.

=go to step 7.

*If the selected disc tray is empty, the next disc tray is selected. If all the disc trays are empty, the last tuned FM or AM station is selected.

20