JVC MX-GT90 Dubbing Tapes, CD Direct Recording, On the unit ONLY 1 Press TAPE 23, then, Load CDs

To record on both sides — Reverse Mode

Press REVERSE MODE so that the Reverse

Mode indicator lights up like — .

•When using the Reverse Mode for recording, start recording in the forward (3) direction

first. Otherwise, recording will stop when recording is done only on one side (reverse) of the tape.

To cancel Reverse Mode, press the button again so that the

Reverse Mode indicator lights up like — .

Dubbing Tapes

You can record from one tape to another.

On the unit ONLY:

1 Press TAPE 23, then 7.

2 Put the source cassette in deck A, and a recordable cassette into deck B.

•Put the cassettes in both decks so that the tapes will run in the forward (3) direction.

3 Press DUBBING.

The (recording) indicator lights up on the display and dubbing starts.

To stop dubbing, press 7so that both decks (A and B) stop.

To record on both sides — Reverse Mode

Press REVERSE MODE so that the Reverse

Mode indicator lights up like — .

To cancel Reverse Mode, press the button again so that the Reverse Mode indicator

lights up like — .

CD Direct Recording

Everything on the CD goes onto the tape in the order it is on the CD, or according to the order you have made for Program play.

On the unit ONLY:

1 Put a recordable cassette into deck B.

2 Load CDs.

3 Press one of the disc number buttons (CD1, CD2, and CD3) to select the disc, then 7.

•If you want to make a program, perform steps 2 to 5 on page 15. After making a program, go to the next step.

4 Press CD REC START. “CD REC” appears, and the (recording) indicator lights up on the

display.

Deck B starts recording and the CD player starts playing. When the recording is done, “CD REC FINISHED” appears on the display, and the CD player and deck B stop.

To stop recording, press REC START/STOP or 7. So that a 4-second blank portion is created on the recording tape. (Remember a 4- second blank is important when using Music Scan — see page 17.)

To record on both sides — Reverse Mode

Press REVERSE MODE so that the Reverse

Mode indicator lights up like — .

•When using the Reverse Mode for CD Direct Recording, start recording in the forward (3) direction first. When the tape reaches its end while recording a song in the forward direction (3), the last song will be re-recorded at the beginning of the reverse side (2).

If you start recording on the reverse side (2), recording will stop when recording is done only on one side (reverse) of the tape.

To cancel Reverse Mode, press the button again so that the

Reverse Mode indicator lights up like — .

– 19 –