JVC MX-K350V manual Setting the REC Recording Timer, Turning the Daily Timer On and Off, English

	Using the Timers
Preparation for each music source:	Turning the Daily Timer On and Off
Perform the following operation according to the music source	Once you have set the Daily Timer, it is stored in memory. So, the
you have selected. Then, the System enters Volume Setting
	Daily Timer will be activated at the same time every day until it is
mode.
	canceled.
When selecting TUNER FM or TUNER AM:

English

Press the 4 or ¢ button to select the preset station number, then press the SET button.

When selecting 1CD – 001:

1.Press the 4 or ¢ button to select the disc number, then press the SET button.

Each time you press the button the disc number changes as follows:

1CD – 001= 2CD – 001 = 3CD – 001 = (back to the be- ginning)

2.Press the 4or ¢ button to select the track number, then press the SET button.

To cancel the Daily Timer temporarily:

1 Press the CLOCK/TIMER button on the Unit repeatedly until the “DAILY” appears on the display.

2 Press the CANCEL button on the Unit.

The “DAILY” indicator goes out and “OFF” appears on the display.

The Timer indicator ( ) and “DAILY” indicator go out and the Daily Timer is canceled temporarily.

When selecting TAPE:	To activate the cancelled Daily Timer:
Before turning off the system, select either the Deck A or Deck
	1 Press the CLOCK/TIMER button on the Unit
B. (See page 20)
When selecting AUX:	repeatedly until the “DAILY” appears on the
Prepare the external equipment so that it will turn on at the ON	display.
time set by the System.
	The “DAILY” indicator blinks and the Timer indicator ( )
To allow this, the equipment should have the timer function.
	lights up on the display.
6 Setting the volume level.
	2 Press the SET button on the Unit.
Press the 4 or ¢ button to select the volume level.
VOL – – – : The current volume level will be used.	The “DAILY” indicator remains lit. Each setting already made
VOL-5,-10, or -15: When the timer is turned on, the Volume	appears on the display in the order of ON time, OFF time, mu-
will be automatically set to the selected level.	sic source and volume, and then the display returns to the orig-
	inal display.

DAILY

7 Press the SET button.

The timer setting is completed, and the “DAILY” indicator stops blinking and remains lit. Each setting you have made ap- pears on the display in the order of ON time, OFF time, music source and volume. Then, the display returns to the display be- fore you set the Timer.

8 Press the % STANDBY/ON button to turn off the System.

The Timer indicator ( ) and “DAILY” indicator are lit on the display, showing that the Daily Timer is set to on.

To change the timer setting, repeat the setting procedure from the beginning.

When the timer ON-time comes:

The following operation will be automatically repeated every day.

•When the timer ON-time comes, and the System automatically turns on. The music source you have set is played. The Timer indicator ( ) blinks during timer operation.

•When the timer OFF-time comes, “OFF” blinks on the display just before the OFF-time and the System automatically turns off. Then, the Timer indicator ( ) remains lit on the display.

•If the System is already on when the timer ON-time comes, the Daily Timer does not work.

CAUTION:

•If the System is unplugged, or a power failure oc- curs, the timer setting loses its setting immedi- ately. You will need to reset the clock first, then the timer.

Setting the REC (Recording) Timer

With the Recording Timer, you can make a tape of a radio broad- cast automatically whether or not you are home.

•You can set the REC Timer whether the System is on or off.

•Perform each setting within 30 seconds. Otherwise, set- ting will be cleared and the procedure must be repeated from the beginning.

•If you have made a mistake while setting the timer, press the CANCEL button on the Unit. However, this does not al- ways cancel the current setting. If the CANCEL button does not work, press the CLOCK/TIMER button on the Unit repeatedly until the display returns to the original dis- play, and start from the first step.

26