Using the CD Player

About Disc Indicator:

Selected Disc indicator

DiscNumber indicator

Disc Rotation indicator

The Disc indicator consists of the following three kinds of indicators:

Disc Number indicator: Lights all the time.

Selected Disc indicator:Lights for the currently selected disc number.

Disc Rotation indicator:Runs when the selected CD is playing or paused. This indicator goes out if a CD is not loaded for the selected disc number.

One Touch Play

The power comes on, and operations are done automatically.

❏By pressing the CD 6 button, the System will come on, and if a CD is loaded for the disc number that was lastly selected, it will start playing from the first track.

❏By pressing the CD1-CD3 button, the System will come on, and if a CD is already loaded for the selected disc number, it will start play from the first track.

To Load CDs

1 Press the CD Open/Close 0 button on theUnit to open the tray.2Place one or two CDs, with its label side up,onto the tray.

Be sure that the CD is securely seated inside the recess on the disc tray.

With the label side up

3Press the DISC SKIP button on the Unit andplace the next CD.

When you press the button, the tray turns for the next CD.

To Unload CDs

Take out the CD as shown below.

1While the CD Player is stopped, press the CD Open/Close 0 button on the Unit to open the tray.

2Remove the CD, then press the DISC SKIPbutton on the Unit.

The tray turns for the next CD.

3Repeat step 2 to remove all the CDs.4Press the CD Open/Close 0 button on theUnit to close the tray.

❏You can remove CDs while listening to the other source.

Tips:• Removing/changing the CDs during playback

While playing back a CD (e.g. CD1), you can remove or change the other CDs (e.g. CD2 and CD3) by pressing the CD Open/Close

0button. After removing or changing, press the same button to close the tray.

Changing the MP3 Playback Mode

When playing an MP3 disc, you can choose the playback mode of the MP3 disc as follows:

Normal (FILE) mode:

The unit recognizes only tracks (files). You can play an MP3 disc like an Audio CD.

GROUP (ALBUM) mode:

The unit recognizes tracks (files) and albums (folders) on an MP3 disc. You can play an MP3 disc according to the way how they are grouped.

On the remote control ONLY:

Press MP3 before or during playing an MP3 disc.

GROUP indicator appears when the MP3 playback mode is the GROUP mode.

•Each time you press the button, the MP3 playback mode changes between “GROUP (ALBUM)” and “Normal (FILE)” alternately.

English

4 Press the CD Open/Close 0 button on theUnit.

The tray is closed.

❏When you use an 8 cm CD, place it on the inner circle of the tray.

❏You can load CDs while listening to the other source or while listening to the CD being played back.

❏When power is turned off with the tray opened, the tray is auto- matically closed.

❏If the CD cannot be read correctly (because it is scratched, for example), the CD is recognized as no disc.

12