Using the Timers

SLEEP

CLOCK/TIMER

SET

¢

4

SLEEP indicator

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Timer indicator

 

DAILY Timer indicator

 

 

 

 

 

 

REC (Recording) Timer indicator

*When the System is in use, the display shows other items as well. For simplicity, we show here only the items described in this section.

English

Three types of timers are available:

DAILY Timer

Use this timer to set wake up everyday to music from any source, instead of an alarm clock.

REC (Recording) Timer

Unattended recording of radio broadcasts. You can set the starting time and ending time.

SLEEP Timer

Fall asleep and have your System turn off automatically after a certain length of time.

Setting the Clock

When you plug the AC power cord into the wall outlet, the time indication “AM 12:00” blinks on the display.

You can set the clock whether the System is on or off.

Fixing the Clock

Using the Unit

1 Press the STANDBY/ON button to turn on the System.

2 Press the CLOCK/TIMER button repeatedly until clock setting display (time indication) appears on the display.

The hour digits of the current clock blink on the display. Each time you press the button, display changes as follows: DAILY = ON TIME = REC TU = ON TIME = Clock Setting display (time indicator) = Canceled = (back to the begin- ning)

Using the Unit

1Press the CLOCK/TIMER button.

The hour digit of the time indication blinks on the display.

2Press the 4 or ¢ button to set the hour.

Pressing the ¢ button moves the time forwards and pressing the 4 button moves it backwards. Holding down the button moves the hour rapidly.

3Press the SET button.

The minute digits of the time indication blink on the display.

• To return to the hour setting, press the CANCEL button.

3Follow steps 2 to 5 of “Setting the Clock” men- tioned above.

•The clock must be correctly set for the timers to work.

•The clock may gain or lose one to two minutes per month.

•If there is a power failure, the clock loses its setting immediately. “AM 12:00” blinks on the display and the clock must be reset.

4Press the 4 or ¢ button to set the minute.

5Press the SET button.

“CLOCK OK” appears on the display. Then, the selected time is set and the seconds start counting from 0.

20