Using the CD Player

 

 

5

Repeat steps 3 and 4 to program other tracks

Programming the Playing Order

 

on the same CD or the other CD.

of the Tracks

 

6

To play the program, Press the CD 6 but-

 

 

 

 

You can program the playing order of the tracks on all the CDs.

 

ton.

Note that you can only make a program when the CD Player is

 

For details, see “To Play the Program You Have Made” men-

stopped.

 

tioned below.

❏You can program up to 60 tracks in any desired order including

the same tracks.

To confirm the programmed contents, while the CD player

To Make a Program

is stopped, press the SET button.

To delete all the tracks in the program, while the CD Player

 

is stopped, press the CANCEL button.

English

1Load CDs2In Stop mode, set the CD Player in ProgramPlay mode.

On the Unit

Press the PROGRAM button, and the “PROGRAM” indicator blinks on the display.

On the Remote Control

Press the PROGRAM/RANDOM button , and the “PROGRAM” indicator blinks on the display.

Each time you press the button, the display changes as follows: PROGRAM = RANDOM REPEAT = Blank display (Normal Play) = (back to the beginning)

•If a program is already made, the last step of the program will be displayed.

3 Press one of the Disc button (CD1-CD3) to select the CD you want to program.

The display will change to the Program Entry display.

•If you try to program a track number that does not exists on the CD, your entry will be ignored.

•If you try to program the 61st track, “FULL” appears on the display.

To Play the Program You Have Made

Press the CD 6 button.

The System plays the tracks in the order you have programmed them.

•To use Repeat Play for Program Play, press the REPEAT but- ton to select “ALL” or “1” before starting playback. For details, see “Repeating Tracks” on page 15.

❏You can skip to a particular program track by pressing the 4 or ¢ button during Program Play.

❏To stop playing, press the 7 button once.

or

Disc number

4Select the track you want to program.

Using the Unit

While the display is blinking, press the 4 or ¢ button to select the track, then press the SET button.

The program order number will be assigned from P-1.

Track number

Disc number

Program order number

Using the Remote Control

Press the numeric keys to directly enter the track number. Then, the program order number will be assigned from P-1.

To Exit and Re-enter Program Play

The program you have made is stored in memory. So, you can exit Program Play temporarily or re-enter Program Play unless you delete the program.

To exit the program mode once, while the CD Player is stopped, press the PROGRAM button on the Unit or the PRO- GRAM/RANDOM button on the Remote Control to light off the “PROGRAM” indicator. By changing the source to the other (e.g. Tuner), the CD Player also exits Program Play mode.

To re-enter Program Play mode, press the PROGRAM or PROGRAM/RANDOM button until the “PROGRAM” indicator blinks again.

•Even when the power is turned off (standby mode), the programmed tracks are not deleted. So, you can re-enter Program Play mode.

14