JVC MX-KB4 Setting the Daily Timer, Using the Timers, TAPE, AUX IN, TUNER FM, TUNER AM, 4Selecting the music source, 2Setting the ON time (Example: AM 10:15)

English

Using the Timers

				2. Press the ¢ or 4 button to set the minute, then press the
	Setting the Daily Timer
	Setting the Daily Timer			SET button.

	Once you have set the Daily Timer, the timer will be activated at
	the same time every day.
	The Timer indicator ( ) and “DAILY” indicator on the display
	shows that the Daily Timer you have set is in effect.
	You can set the Daily Timer whether the System is turned on or			“OFF TIME” appears and then the System enters OFF-time
	off.			setting mode. The current OFF time appears on the display,
				setting mode. The current OFF time appears on the display,
				and the hour digits blink.
				and the hour digits blink.


	• You can set the Daily Timer whether the System is on or off.
	• Perform each setting within approx. 30 seconds. Other-
	wise, setting will be cleared and the procedure must be
	repeated from the beginning.
	• If you have made a mistake while setting the timer, press
	the CANCEL button on the Unit. However, this does not al-
	ways cancel the current setting. If the CANCEL button
	does not work, press the CLOCK/TIMER button on the
	Unit repeatedly until the display returns to the original dis-			3 Setting the OFF time (Example: PM 1:15).
	play, and start from the first step.			3 Setting the OFF time (Example: PM 1:15).

1. Press the ¢ or 4 button to set the hour you want the

Using the UnitSystem to be turned off, then press the SET button. The minute digits of the ON time blink on the display.

1 Press the CLOCK/TIMER button until “ON TIME” immediately after “DAILY” appears on the display.

At this time, “DAILY” indicator blinks and the Timer indicator () lights up on the display.

Each time you press the button, the display changes as follows: DAILY = ON TIME* = REC = ON TIME = Clock setting display = Canceled = (back to the beginning)

*: This item should be selected for the Daily Timer setting.

Then, the System enters ON-time setting mode, and the current ON time appears on the display and the hour digits blink.

2.Press the ¢ or 4 button to set the minute, then press the SET button.

The System enters Music Source Selecting mode and “TUNER FM” appears on the display.

2Setting the ON time (Example: AM 10:15).

1.Press the ¢ or 4 button to set the hour you want the System to come on, then press the SET button.

The minute digits of the ON time blink on the display. Pressing the ¢ button moves the time forwards and press- ing the 4 button moves it backwards.

Holding down the button moves the time rapidly.

4Selecting the music source.

Press the ¢ or 4 button to select the music source you want to listen to, then press the SET button.

Each time you press the ¢ or 4 button, the display changes as shown below:

TUNER FM = TUNER AM = CD = TAPE = AUX IN = (back to the beginning)

According to the music source you have selected, the next operation differs.

TUNER FM: Tunes in to the specified preset FM station.

TUNER AM: Tunes in to the specified preset AM station.

CD: Plays the specified track on the specified CD.

TAPE: Plays a tape in Deck A.

AUX IN: Plays an external source.