Using the Timers

Preparation for each music source:

Turning the Daily Timer On and Off

Perform the following operation according to the music source

Once you have set the Daily Timer, it is stored in memory. So, the

you have selected. Then, the System enters Volume Setting

Daily Timer will be activated at the same time every day until it is

mode.

canceled.

When selecting TUNER FM or TUNER AM:

 

English

Press the ¢ or 4 button to select the preset station number, then press the SET button.

When selecting CD :

Press the ¢ or 4 button to select the disc number, then press the SET button.

Each time you press the button the disc number changes as fol- lows:

DISC – = DISC 1 = DISC 2 = DISC 3 = (back to the be- ginning)

•If no disc number is specified, playback will start from the first track of the currently selected disc.

When selecting TAPE:

Insert a cassette tape you want to play into Deck A.

When selecting AUX:

Prepare the external equipment so that it will turn on at the ON time set by the System.

To allow this, the equipment should have the timer function.

5Setting the volume level.

Press the ¢ or 4 button to select the volume level.

VOL – – : When the volume level is under 18: The current volume level will be used.

When the volume level is over 19: The volume level is automatically set to 18.

MIN, 1-31, or MAX: When the timer is turned on, the Volume will be automatically set to the selected level.

To cancel the Daily Timer temporarily:

1Press the CLOCK/TIMER button on the Unit repeatedly until the “DAILY” appears on the display.

2Press the CANCEL button on the Unit.

“OFF” appears and both the Timer indicator () and the “DAILY” indicator go out.

To activate the cancelled Daily Timer:

1Press the CLOCK/TIMER button on the Unit repeatedly until the “DAILY” appears on the

display.

The “DAILY” indicator blinks and the Timer indicator () lights up on the dispaly.

2Press the SET button on the Unit.

“ON” appears on the display. The Timer indicator () and the “DAILY” indicator remain lit, and the display returns to the original display.

•If the System is unplugged, or a power failure occurs, the timer setting will be lost in a few days. You will need to reset the clock first, then the timer.

6Press the SET button.

The timer setting is completed and the display returns to the display before you set the Timer.

7 Press the STANDBY/ON button to turn off the System, if necessary.

The Timer indicator () and “DAILY” indicator are lit on the display, showing that the Daily Timer is set to on.

To confirm / change the timer setting, repeat the setting procedure from the beginning.

When the timer ON-time comes:

The following operation will be automatically repeated every day.

•When the timer ON-time comes, the System automatically turns on. The music source you have set is played. The Timer

indicator () blinks and “DAILY” indicator lights during timer operation.

•When the timer OFF-time comes, the System automatically

turns off. Then, the Timer indicator () and “DAILY” indica- tor remain lit on the display.

Setting the REC (Recording) Timer

With the Recording Timer, you can make a tape of a radio broadcast automatically whether or not you are home.

•You can set the REC Timer whether the System is on or off.

•Perform each setting within approx. 30 seconds. Other- wise, setting will be cleared and the procedure must be repeated from the beginning.

•If you have made a mistake while setting the timer, press the CANCEL button on the Unit. However, this does not al- ways cancel the current setting. If the CANCEL button does not work, press the CLOCK/TIMER button on the Unit repeatedly until the display returns to the original dis- play, and start from the first step.

•If the System is already on when the timer ON-time comes, the Daily Timer does not work.

22