Listening to the Radio
To select the band (FM or AM)
To tune in to a station
While FM or AM is selected...
Remote control: | Main unit: |
1 sec.
1sec.
Frequency starts changing on the display.
When a station (frequency) with sufficient signal strength is tuned in, the frequency stops changing.
•When you repeatedly press the button, the frequency changes step by step.
To stop searching manually, press either button.To preset the stations
You can preset 30 FM and 15 AM stations.
1Tune in to a station you want to preset.2Activate the preset number entry mode.•Finish the following process while the indication on the display is flashing.
3Select a preset number for the station you store.See “How to Select Numbers” on page 9.
• You can also use 4/¢on the main unit.
4Store the station.If the received FM station is hard to listen
MONO
Canceled
Remote
ONLY
memo
MONO: Reception will improve though stereo effect is lost. MONO indicator lights up.
•If you preset a station set to MONO, the station is stored with the MONO setting.
10