To tune in to channels
Remote
ONLY
The ALL indicator lights up.
ALL SRCH
CAT SRCH
ALL indicator
2Select the channel.Remote control: | Main unit: | ||
|
|
|
|
|
|
|
|
You can select the channel category and tune in to only the channels included in the selected category.
1Select “CAT SRCH.”ALL SRCH
CAT SRCH
2Select the channel category.The channel with the smallest channel number in the category is displayed.
3Select the channel.Remote control: | Main unit: | ||
|
|
|
|
|
|
|
|
The selected channel is tuned in after a few seconds.
You can tune in to the desired channel directly by entering the channel number.
1Press DIRECT.2Press the numeric keys to enter the desired channel number while the channel number position is flashing.
•To use the numeric keys, see “How to Select Numbers” on page 9.
Using preset tuning
You can preset up to 30 channels.
To store the preset channels
1Tune in to the channel you want to preset.2Activate the preset number entry mode.
•Finish the following process while the indication on the display is flashing.
3Select a preset number for the channel you store. See“How to Select Numbers” on page 9.• You can also use 4/¢on the main unit.
4Store the channel.5Repeat steps 1 to 4 until you store all the desired channels.19