Daily Operations – Sound & Other Adjustment
Adjusting the Volume
You can adjust the volume level to MIN,
Remote control: | Main unit: | ||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
VOLUME
|
| Remote |
To drop the volume in a moment | ONLY | |
| ||
FADE | To restore the volume, press again, or | |
MUTING | adjust the volume level. |
Adjusting the Sound
To emphasize theThis function emphasizes the sound.
OFF
(Canceled)
Sound ModeYou can select one of 3 SEA (Sound Effect Amplifier) modes. You can use this effect only for playback.
ROCK POP
|
| FLAT |
| CLASSIC |
|
|
| ||
| (No sound effect) | |||
|
|
|
| |
ROCK |
| Boosts low and high frequencies. | ||
|
| Good for acoustic music. | ||
|
|
|
| |
POP |
| Good for vocal music. | ||
|
|
|
| |
CLASSIC |
| Set for wide and dynamic sound stereo | ||
|
| systems. |
| |
|
|
|
| |
FLAT |
| No sound effect applies. | ||
|
|
|
|
|
Setting the Clock | Main Unit | |
ONLY | ||
|
Without setting the
•To exit from the clock setting, press CLOCK/TIMER as required.
•To go back to the previous step, press CANCEL/DEMO.
1Activate the clock setting mode.•If you have already adjusted the clock before, press the button repeatedly until the clock setting mode (see page 24) is selected, then press SET/RESUME.
2Adjust the hour.3Adjust the minute.“CLOCK OK” appears and the
Remote
To check the current time during play | ONLY |
Clock Source information
If there is a power failureThe clock loses the setting and is reset to “AM 12:00.” You need to set the clock again.
16