Setting up your TV

•The AUTO PROGRAM function does not set the programme number PR 0 (AV) for your video cassette recorder. You will need to set this using the MANUAL function.

•In some areas you may get TV reception from more than one transmitter, for example different ITV regions. In this case each TV channel could be set twice. If this happens, the first set of channels will have the stronger signal. If you want to delete the second set of channels, you will have to do it manually (see page 38).

For users in the UK:

If you have any problems setting up your new TV, please call the

Helpline on 0870 330 5000.

For users in the Republic of Ireland: If you have any problems setting up your new TV, please call the

Helpline on 1890-582500.

„ACI function

This TV has an ACI function which decodes the ACI (Automatic Channel Installation) data.

Using the ACI function allows all TV channels transmitted from the cable TV station to be properly registered quickly according to the data from the cable TV station.

If “ACI START/ACI SKIP” appears in the AUTO PROGRAM menu:

You can use the ACI (Automatic Channel Installation) function to decode the ACI data and complete the registration of all the TV channels in a short period of time.

Press the 6buttons to choose ACI START. Then press the a button to start the ACI function

Depending on your cable TV station, there may be a broadcast selection menu set up by the cable TV station.

Follow the menu instructions and use the 5and 6buttons to operate the menu.

After you have made the setting, press the abutton.

•If you have any questions about the items in the Broadcast Selection menu or how to operate the menu, please contact your cable TV station.

•If you don’t want to use the ACI function, press the 6buttons to choose ACI SKIP and then press a.

•When the cable TV broadcast reception is poor, the ACI function will not work properly.

•If there is an error in the ACI data itself, the TV channel cannot be registered properly. If this happens, turn the ACI function off (ACI SKIP) and use the AUTO PROGRAM function. Alternatively, use the EDIT/MANUAL function to correct the Programme number (PR) setting.

If “ACI ERROR” is displayed in the AUTO PROGRAM menu:

“ACI ERROR” means that the ACI function is not working properly. Press the 2button to start the ACI function again.

If “ACI ERROR” still appears even after you have tried to start the ACI function several times, press the 3button to start the AUTO PROGRAM function. It does not cause any problem because all the TV channels are registered to the Programme numbers (PR) by the AUTO PROGRAM function.

„Downloading the data to VCR

You can transmit to the latest Programme numbers (PR) data to a VCR with the T-V LINK function.

Caution

•This only works when a T-V LINK compatible VCR is connected to the EXT-2 terminal.

•This only works when the T-V LINK menu is being displayed.

T-V LINK

DOWNLOAD TV VCR

OK

EXIT

D0005-EN

11