PICTURE menu

„COLOUR SYSTEM

The colour system is chosen automatically. However, if the picture is not clear or no colour appears, choose the colour system manually.

1Choose COLOUR SYSTEM. Then press the aor 3button

The sub-menu of the COLOUR SYSTEM function appears.

>> COLOUR SYSTEM

MAINSUB

PALAUTO

•The AUTO function may not function properly if you have poor signal quality. If the picture is abnormal in the AUTO function, choose another colour system manually.

•When in the Programme numbers PR 0 (AV) to PR 99, you cannot choose NTSC

3.58 or NTSC 4.43.

SECAM cannot be chosen when the COUNTRY setting is UNITED KINGDOM.

•COLOUR SYSTEM cannot be chosen when you are watching the EXT-4 picture or PC picture.

OK

D0016-EN

2Press the 5buttons to choose MAIN or SUB

MAIN:

You can change the colour system of the main-picture.

SUB:

You can change the colour system of the sub-picture.

•Choose MAIN when a sub-picture is not displayed.

3Press the 6buttons to choose the appropriate colour system. Then press the abutton

PAL:

PAL system

SECAM:

SECAM system

NTSC 3.58:

NTSC 3.58 MHz system

NTSC 4.43:

NTSC 4.43 MHz system

AUTO:

This function detects a colour system from the input signal. You can only use this when you are viewing a picture from programme number PR 0 (AV), or an EXT terminal.

„4:3 AUTO ASPECT

You can choose one of three ZOOM modes, REGULAR, PANORAMIC or 14:9 ZOOM, as the ZOOM mode for the normal picture (4:3 aspect ratio).

1Choose 4:3 AUTO ASPECT then press the abutton

>> 4:3 AUTO ASPECT

PANORAMIC

REGULAR 14:9 ZOOM

OK

D0017-EN

2Press the 6buttons to choose a ZOOM mode

32