Setting up your TV
1Turn on the VCR
2Press the abutton
The data transmission begins.
DOWNLOAD TV VCR
TRANSFER. . . . .
When you have a
The
When the
If “FEATURE NOT AVAILABLE” appears at the
•Has a
•Has the VCR power been turned on?
•Does the SCART cable that is connected to the
To use
A
“Data Logic” (a trademark of Metz Corporation)
“Easy Link” (a trademark of Phillips Corporation)
“Megalogic” (a trademark of Grundig Corporation)
“SMARTLINK” (a trademark of Sony Corporation).
The VCR will automatically download the registered data on the TV channels from the TV. This means you do not need to set up the program channels on your VCR manually. The preset download function automatically begins when the initial setting is complete or whenever you carry out the AUTO PROGRAM or EDIT/MANUAL functions.
You can also carry out this function using your VCR controls.
When “FEATURE NOT AVAILABLE” is displayed:
If “FEATURE NOT AVAILABLE” is displayed, the download was not performed correctly. Before trying to download again, check that:
• the VCR power is turned on
• the VCR is
• the VCR is connected to the
• the SCART cable is fully wired.
12