15
Use the supplied power cord which best
suits the area in which you live.
Quick Setup Getting Started
Connecting the TV and receiver
Use the supplied system cable to connect
the TV to the receiver.
The two connectors are of different shapes.
Ensure that the pins on connector 1 are
oriented correctly, press the connector into
the socket, and tighten the screws at left
and right to lock it in place.
Press connector 2 firmly into place until it
is locked.
Disconnecting the system cable
Release connector 1 by unscrewing the
screws at left and right and removing it from
the socket.
Release connector 2 by removing it from
the socket while pressing the release
bottoms on either side.
Connecting the power cord to the AC outlet
Insert the AC plugs on the power cords from
the TV and receiver into AC outlets.
Caution
• Operate only from the power source
specified (AC 120V, 60 Hz) on the unit.
• Failure to use the supplied power cord or
to insert it into a correctly grounded outlet
may result in electric shocks.
2
1
2
1
Insert the AC plug into a correctly grounded
outlet.
• Remove the AC plug from the outlet to
completely disconnect the TV from the
power supply.
DISPLAY OUT(SYSTEM CABLE)
R
-
AUDIO
-
L VIDEO
DIGITAL IN
AV
COMPULINK
SUB
WOOFER
OUT
Pb
Pr
Pb
Pr
AUDIO OUT
Receiver rear
Back of the TV
Back of the receiver
AC INLET Power cord
AC INLET
Power cord
LCT1480-001A_rev7 15 7/29/03, 11:03:27 AM