35
Initial Setup
Auto Tuner Setup
The auto tuner setup function is described on page 27 as the interactive plug-in menu. If you
need to run the auto tuner setup again, follow the steps below.
Press the MENU button
To AUTO TUNER SETUP
¥
To operate
¥To choose CABLE or AIR
Press the OK button to start
Programming will take approximately 1 to 2 minutes. The auto tuner is finished when the
message PROGRAMMING OVER! appears onscreen.
Press the Menu button when finished
Channel Summary
Channel summary allows you to customize the line-up of channels received by your TV.
You can add or delete channels from the line-up or prevent any unauthorized viewers from
watching any or all 181 channels.
Press the MENU button
To CHANNEL SUMMARY
¥
To operate
The Channel summary screen will now be displayed with
the channels set to scan marked with an “✓”. You can
delete channels from the scan by removing the “✓”. If any
channels were missed during auto tuner setup and you wish
to add them, you may by placing an “✓” next to the channel
number.
¥
To the SCAN column
Press the OK button to include or delete from scan
Press the MENU button when finished
You can block access to a channel by activating the channel lock.
Press the MENU button
To CHANNEL SUMMARY
¥
To operate
¥
To the Lock Column ( )
Press the ZERO button to lock or unlock that channel
Press the MENU button when finished
LCT1480-001A_rev7 35 7/29/03, 11:03:44 AM