Additional preparation

ENGLISH

„Connecting AV COMPU LINK supported devices

AV COMPU LINK remote control system is a system in which related devices are automatically controlled when you operate one device.

If you apply this system to the TV, you can have the TV automatically perform the required operations by operating one external device. You don’t have to use the TV’s remote control to turn on the TV or change the VIDEO modes.

Examples of the AV COMPU LINK remote control system operations

Simply by pressing the PLAY button on a VCR or a DVD player, you can view images from the device.

Simply by inserting a prerecorded tape (a tape with the record safety tab removed) to a VCR, you can view the tape.

Simply by operating the AV Control Receiver, you can have the TV turned on/off (in standby mode) or the VIDEO mode changed correctly.

•The performance of the AV COMPU LINK remote control system varies depending on the connected device. See the device’s instruction manual.

•When you select “TV SOUND” as the input source with the AV Control Receiver, there are cases where the TV’s muting function automatically operates and the sound from the TV’s speakers is

muted.

In such cases, press the 7q buttons or the l(muting) button on the TV’s remote control to cancel the muting function. You can regain the sound from the TV’s speakers.

Conditions to use the AV COMPU LINK remote control system

•A device equipped with an AV COMPU LINK terminal is required.

•You must connect the TV and the device with an AV COMPU LINK cable. AV COMPU LINK cable is not supplied with this TV. If an AV COMPU LINK cable is unavailable, connect them with a cable with dia. 3.5 mm (mono) male plugs at both ends.

•You must connect the device to an appropriate VIDEO terminal and set it up correctly. Otherwise the AV COMPU LINK remote control system will not function correctly. For details, see “Setting up the AV COMPU LINK remote control system”.

Setting up the AV COMPU LINK remote control system

Caution

•With some devices, the setup method differs from the ones explained here. Be sure to read the device’s instruction manual thoroughly before setting it up.

1Connect the device to the TV’s VIDEO-1, VIDEO-2 or VIDEO-3 terminal.

2Connect the TV’s AV COMPU LINK terminal and the device’s AV COMPU LINK terminal with an AV COMPU LINK cable.

3Change the device’s setting according to the VIDEO terminal it is connected to.

44