JVC PK-CL200U manual Turn the television off, Unplug the television

Check the accessories

Check that nothing is missing. The kit will include:

•High-Pressure Mercury Lamp

•Hex Wrench

•Replacement Instructions

•Recycling Information Sheet

•Pre-paid shipping label

Replacing the Lamp

1) Turn the television off.

Press the Power button on the remote control or television’s front panel to turn the television off. Wait until the picture has closed and the LED lights on the front panel have stopped blinking indicating the lamp cool-down cycle is complete.

Warning: The cool-down cycle cools the lamp from its normal operat- ing temperatures. This does not mean the lamp will now be cool enough to handle safely. Wait at least one hour before proceeding.

2) Unplug the television.

Disconnect the television’s power cord from the AC outlet. Make sure the LED lights have stopped blinking before you unplug the televi- sion. Never attempt to replace the lamp with the television plugged in.

Continued on the next page 3