Stanley Black & Decker RW30 Troubleshooting, « on » TRANSLAMATIC‘s green light does not work

TROUBLESHOOTING

	The « ON » TRANSLAMATIC‘s green light does not work
	PROBABLE CAUSE	CHECKS AND REMEDYS
	« ON/OFF » switch	Check its good position and its good working
		order
	Alimentation’s cable cutted	Check the alimentation’s cable
	Alimentation’s plug	Check the alimentation’s plug
	Alimentation’s fuse or circuit breaker	Check the primary alimentation
	The « ON » TRANSLAMATIC‘s green light works but the Charlie box does not work
	PROBABLE CAUSE	CHECKS AND REMEDYS
	Link cable between the TRANSLAMATIC and	Check the connexions or/and change the cable
	the Charlie box
	Charlie box’s fuse	Check the fuse
	Respect the « ON »process order	Put « ON » the Translamatic before putting the
		Charlie box “ON”.
	Charlie box	Try with another Charlie box
	Interface card	Check if the interface card alimentation’s green
		light is alight during the cycle. Call our After
		Sales Dpt
	Stabilized alimentation out of service	Check the alimentation’s tension, normally 27V in
		CC.
		Call our After Sales Dpt
	The welding support head does	not move on one or several axis
	PROBABLE CAUSE	CHECKS AND REMEDYS
	Charlie box	Try with another Charlie box
	Charlie box keyboard	Check the good working order of the keyboard’s
		contacts. Check the good working order of the
		keyboard using it in the test mode for example.
		Call our After Sales Dpt
	Interface card	Check the connexions
		Check if the card’s lights are alight during a
		moving command. Call our After Sales Dpt
	Axis engine’s cards	Check if the card’s lights are alight during a
		moving command.
		Switch the connexions between the 2 engines and
		the recheck the moving of the torch (the
		movements are reversed)
		Call our After Sales Dpt
	Translation’s screw mechanically blocked	Check if the screw is not top-blocked on the stop
		bumpers or on the ball bearing or on the cardan.
		Unscrew manually the screw if it is possible.
		Call our After Sales Dpt
	Uncontrolled speed of the torch and/or	no high speed and/or speed not as usual.
	PROBABLE CAUSE	CHECKS AND REMEDYS
	Charlie box	Try with another Charlie box
		Change the Charlie box card
22 - RW30 USER MANUAL