Programmed playback of an MP3 disc
Up to 99 tracks can be programmed to play in any desired order.
1In stop mode, press the PROGRAM button. Alternatively, press the PROGRAM/SET button on the remote control unit.
The PROG. indicator starts blinking in the display window.
2Press the PRESET UP or PRESET DOWN button to select a desired album.
Alternatively, press the GROUP UP or GROUP DOWN button on the remote control unit.
3Press the 4 or ¢ button to select a desired track in the album.
Alternatively, use the number buttons on the remote control unit.
4Press the PROGRAM button.
“OK” is displayed for a moment and the PROG. indicator lights up steadily.
5Repeat steps 1 to 4 to program other tracks.
6Press the 3/8 button to start programmed playback.
To clear the program, press the 7button in stop mode. “PROG CLEAR” scrolls through the display window. The program is also cleared when you open the disc door.
To check the programmed tracks, press the 4 or
¢button repeatedly in stop mode.
Each time you press the button, the program number and track number are displayed in the display window.
Note:
You cannot program more than 99 tracks. “PRG FULL” is displayed when you try to program the 100th track.
13
