RECORDING
Basic operation
1 2 3
1Prepare the recording source.
•When recording from the radio
Set to the TUNER mode and tune in a desired station.
•When recording from a CD
Set to the CD mode and load a CD.
2Load a blank or erasable cassette. Use only a
3Press the ¶ REC and 2 PLAY buttons simultaneously.
To stop recording
Press the § STOP/EJECT button.
The tape also stops when it reaches the end.
Notes:
•It should be noted that it may be unlawful to re- record
•In recording, the ALC circuit automatically optimizes the recording level. Adjustment of the recording level is unnecessary.
•If a recording you made has excessive noise or static, the unit may have been too close to a TV which was on during the recording. Either turn off the TV or increase the distance between the TV and the unit.
STANDBY
2
Using the beat-cut function
When recording an AM broadcast, beats may occur. If this happens, press the FM MODE/BEAT CUT button to select the better
To start recording at the exact moment
1 Press the 8 PAUSE button first, then press the
¶REC and 2PLAY buttons simultaneously, thus entering the
2 Press the 8 PAUSE button to release the tape at the exact moment you want to start recording.
Note:
Do not leave the unit in pause mode for more than a few minutes. Instead, press the §STOP/EJECT button to stop the tape.
18