JVC RC-EX30B manual Presetting stations, Tuning in a preset station

Presetting stations

You can preset 20 FM and 10 AM stations.

		1		2,6	3,5,6		4,6	2,6	4,6	3,5,6	1	4,6
					PROGRAM/					1	2	3
					CLOCK	SET
					PRESET
					DOWN
										4	5	6
				PUSH
										7	8	9
										0
												+
		GROUP			STOP
TAP												–
				E
E	RANDOM
				AUS
	CD			PLAY/P
		TUNER
			REMOTE	DISPLAY
		BAND	SENSOR

RM-SRCEX30J REMOTE CONTROL

English

There is a time limit in doing the following steps. If the setting is canceled before you finish, start from step 3 again.

Note:

In some cases, test frequencies have been already memorized for the tuner since the factory examined the tuner preset function before shipment. This is not a malfunction. You can preset the stations you want into memory by following the presetting method.

1 Press BAND/TUNER to select the band, FM or AM.

2Press 4 or ¢ to tune in the station you want to preset.

3Press PROGRAM/CLOCK SET.

The PROGRAM indicator and the preset number start blinking in the display window.

PROGRAM

MHz

4 Press PRESET UP or PRESET DOWN to select the preset number.

You can use the number buttons on the remote control unit to select the preset number directly.

Example:

To select preset number 5, press 5.

To select preset number 15, press OVER, 1, then 5. To select preset number 20, press OVER, 2, then 0.

PROGRAM

MHz

Preset number

5Press PROGRAM/CLOCK SET.

The tuned station in step 2 is stored in the preset number selected in step 4.

Storing a new station on a used number erases the previously stored one.

If you used the number buttons to select the preset number in step 4, pressing PROGRAM/CLOCK SET is not necessary in this step.

6Repeat steps 2 to 5 to preset other stations, using different preset numbers.

Tuning in a preset station

1 Press BAND/TUNER to select the band, FM or AM.

2Press PRESET UP or PRESET DOWN repeatedly until the desired preset number appears.

You can use the number buttons on the remote control unit to select the preset number directly.

Example:

To select preset number 5, press 5.

To select preset number 15, press OVER, 1, then 5. To select preset number 20, press OVER, 2, then 0.

Note:

If you unplug the AC power cord or if a power failure occurs, the preset stations will be erased in a few days. If this happens, preset the stations again.

16