Programmed playback of an MP3 disc
Up to 40 tracks can be programmed to play in any desired order.
English
1Press PROGRAM/CLOCK SET in stop mode. The PROGRAM indicator appears in the display window.
2Press GROUP + or GROUP – to select a desired group (album).
The first track number in the selected group (album) is shown.
3Press 4 or ¢ to select a desired track in the group (album).
You can use the number buttons on the remote control unit to select a desired track.
4Press PROGRAM/CLOCK SET.
5Repeat steps 2 to 4 to program other tracks.
6Press PLAY/PAUSE 3/8.
The tracks are played in the order you have programmed.
You can press 3/8 on the remote control unit to start programmed playback.
To check the program contents
Press PROGRAM/CLOCK SET repeatedly in stop mode.
Each time you press the button, the program number and the corresponding track number are shown in the display window.
To change the program
You can add tracks in the program or edit the program in the same manner as for an audio CD. See the previous page.
To erase the entire program in the memory
Press STOP 7 (or 7 on the remote control unit) in stop mode.
The program is cleared, and the PROGRAM indicator goes off.
The program is also cleared when you open the disc door or turn off the unit.
Note:
You cannot program more than 40 tracks.
“– – FULL –
Playing back introductions – Intro playback
Every track of a CD can be played for the beginning ten seconds.
INTRO
1 2 3
4 5 6
7 | 8 | 9 |
0
+
–
Press INTRO.
The INTRO indicator appears in the display window and intro playback starts.
To use intro playback for programmed and random playback, press the button after starting playback.
To stop during playback
Press STOP 7 (or STOP on the remote control unit). The INTRO indicator goes off and the unit exits from the intro playback.
To cancel intro playback without stopping
Press INTRO during playback.
The INTRO indicator goes off and the unit continues playback.
14
