Cassette Playback, Loading a cassette | JVC RC-EX30B manual

English

CASSETTE PLAYBACK

Notes on cassette tapes

•Use only type-I normal tapes. The recording/playback characteristics of this unit are those for normal tapes, which have different characteristics from CrO2 and metal tapes.

•The use of tapes longer than 120 minutes is not recommended, since characteristic deterioration may occur and these tapes easily jam in the pinch roller and the capstan.

•Loose tape may cause trouble. Gently tighten the tape with a pencil as shown in the figure below.

Turn the pencil to take up the slack.

•To prevent recordings from being accidentally erased, remove the tab(s) with a screwdriver. After the tabs have been broken off, reseal the slots with adhesive tape to erase or re-record.

Loading a cassette

1 Press STOP/EJECT § to open the cassette holder.

2 Load a cassette with the open side up and the playback side facing out as shown in the figure below.

+Forward direction

CD		PLAY/PAUSE
CD
TUNER	REMOTE	DISPLAY
BAND	SENSOR	DISPLAY
BAND

3Close the cassette holder by pressing it gently and firmly.

The cassette holder clicks back into position.

17

Image 20

JVC RC-EX30B manual Cassette Playback, Loading a cassette, Close the cassette holder by pressing it gently and firmly

Contents

RC-EX30B Avisos, precauciones y otras notas For U.S.A Important for Laser Products Safety Precautions ContentsFeatures Handling Precautions Avoid using the unit in the following places Operation on batteries Power SupplyOperation on household AC Names of Parts and Controls Top and front sides Remote Control Unit Installing batteriesBattery replacement Replace the battery cover To switch off the power supply completely Turning the Unit ON/OFFNames of buttons STANDBY/ON button Setting the Clock To show the clock when the unit is on Adjusting the Sound Adjusting the volumeListening through headphones Selecting the sound mode When playing a CD-R or CD-RW Cleaning discsPlaying Compact Discs Handling discs Adjust the volume and sound Basic operationTo stop playback Press PLAY/PAUSE 3/8 to start playback To pause playback SkippingSelecting a desired track directly Selecting a desired group album and track MP3 disc only Press Repeat on the remote control unit during playback Repeat/Random playbackRepeat playback Random playback Programmed playback Programmed playback of an MP3 disc Playing back introductions Intro playback Changing the FM reception mode Using the antennas Press Preset UP or Preset Down to select the preset number Presetting stationsTuning in a preset station Close the cassette holder by pressing it gently and firmly Cassette PlaybackLoading a cassette Press Tape to enter the tape mode Load a cassette Press Play 2 to start playback Adjust the volume and soundFast-winding a tape Press STOP/EJECT § Using the beat-cut function RecordingStandard recording To stop recording Load a CD Press CD/RANDOM to enter CD mode Press Tape on the unit to enter the tape mode Press REC ¶Synchronized recording with CD playback Erasing Maintenance Cleaning the heads, capstan and pinch rollerCleaning the CD pickup lens Open the disc door and clean the lens Troubleshooting Symptom Possible cause Action Specifications CD playerTuner Cassette deck Warranty Repair / Replacement Form Limited Warranty Victor Company of Japan, Limited Chaine Portable a CD Mises en garde, précautions et indications diverses For Canada/pour le Canada Cm CD playback capability Handling Precautions Power Supply Names of Parts and Controls Output is switched off with headphones connected Turning the Unit ON/OFF Setting the Clock Adjusting the Sound Playing Compact Discs Cm CD can be played on the unit without an adapter To pause playback Repeat/Random playback Programmed playback Programmed playback of an MP3 disc Radio Reception Presetting stations Cassette Playback Basic operation Recording Synchronized recording with CD playback Maintenance To bright light direct sunlight, etc Sunlight, etc DC 9 V R20 SUM-1/D EN, FR