Dynasty Stoves DOBB3003A, DOPB3003A Installing Access Doors, Models DADA-18, DADA-30 and DADA-42

Installing Access Doors
			installation
Models DADA-18, DADA-30 and DADA-42
1. Provide cut out and doorjamb with inside dimensions as	5. Adjust doors as follows:
follows: 19 3/8" X 16 1/4" for DADA-18, 19 3/8" X 28	a)	For height adjustment, loosen the two screws
1/4" for DADA-30, and 19 3/8" X 40 1/4" for DADA-42
		attached to each mounting plate. (See figure A)
2. Check fitting of frame against cutout. Mark location of
	b)	Snap off hinge and secure mounting plate with
rivet nuts.
		#6 X 1 flat phillips S/S. (See figure B).
3. Secure the steel frame with 16 screws of type #10 X
	c)	For side adjustment turn screw to increase or
3/4 truss head phillips S/S.
		decrease door overlay. (See figure C)
4. Attach doors to frame. (See figure 2)
	d)	For depth adjustment, loosen screw, adjust door to

desired position and retighten screw. (See figure D)

Installation

FIG A	FIG B	FIG C	FIG D
HEIGHT ADJUSTMENT	SECURE	SIDE ADJUSTMENT	DEPTH
	MOUNTING PLATE		ADJUSTMENT

15