USING YOUR GRILL
(continued)
operation
Lighting The Grill Burners
7.Repeat the procedure or try “Manual Lighting procedure” below.
8.Upon successful lighting, repeat the process on the other burners you wish to light.
9.To shut off burners push in knob and turn to OFF. It is normal to hear a popping sound when the burners are turned off.
Manually Lighting The Grill Burners
1.Open the hood.
2.Remove the grates over the burners you wish to light.
3.If you have just attempted to light the burner with the rotary igniter knob, allow 5 minutes for any accumulated gas
to dissipate.
4.Keep your face as far away from the burners as possible.
5.Pass a lit, long stem match through one of the small briquette tray holes and position it near the burner ports.
6.Push in and turn counter clockwise the grill’s gas control knob to the LITE position.
7.Listen for the “Woosh” sound. If the burner does not light after 5 seconds, turn the control knobs to the OFF position. Wait 5 minutes until the gas clears before attempting to light it again.
8.If the burner does not light after several attempts see Troubleshooting Guide on pages
9.Upon successful lighting, repeat the process on the other burners you wish to light.
20