INSTALLATION OF YOUR DYNASTY GRILL

(continued)

installation

Gas Requirements

Your Dynasty grill is designed to work with Natural or Propane Gas. Check your rating plate to make sure the gas supply provided is the gas type listed on the rating plate (see page 3).

An installer supplied gas shut-off valve must be located in an easily accessible location. Use only pipe sealant that is an approved type and is resistant to the actions of propane gas.

IMPORTANT: Your Dynasty grill must use the gas type specified unless converted by an authorized servicer using factory parts.

IMPORTANT: All plumbing must comply with applicable codes (see page 2).

REGULATOR

ELBOW MAY BE ROTATED FOR

REAR GAS CONNECTION

AS SHIPPED FROM

FACTORY

TYPICAL BOTTOM

GAS CONNECTION

STREET ELBOW

MANIFOLD PIPE

INSTALLER SUPPLIED SHUT OFF VALVE IN

ACCESSIBLE LOCATION

• Typical Natural Gas Hook Up

8

Page 8
Image 8
Dynasty Stoves DOBQ3000A, DOPB3003A, DOBB4203A, DOBB3003A, DOBQ4200A, DOBB1803A Gas Requirements, Typical Natural Gas Hook Up