USING THE TOP BURNERS
operation
Some Dynasty grills have optional top burners equipped with igniter buttons for lighting.
Lighting The Open Burners (Optional)
1.Remove the burner cover, if any, or any cooking utensils from the burner grate. Caution: The burner cover may be hot if the grill burners are in operation.
2.Push in and turn counter clockwise the gas control knob for the burner to the LITE position.
3.Push the igniter button; a multiple clicking noise should be heard from the igniter indicating a spark is being provided to the burner.
4.If the burner does not light on the first try, repeat immediately.
5.If the burner does not light after 5 seconds, turn the control knobs to the OFF position. Wait 5 minutes until the gas clears before attempting to light it again.
6.Repeat the procedure or try “Manual Lighting procedure” below.
7.Upon successful lighting, repeat the process on any other available burner you may wish to light.
Manually Lighting The Open Burners
1.Remove the burner cover, if any, or any cooking utensils from the burner grate. Caution: The burner cover may be hot if the grill burners are in operation.
2.Push in and turn counter clockwise the gas control knob for the burner to the LITE position.
BURNER CONTROL KNOB
IGNITER BUTTON
3.Hold a lit long stem match next to the burner ports.
(continued on next page)
24
