RD-MD5(B)-e.fm Page 17 Wednesday, December 2, 1998 11:40 AM
•You can also complete editing operation by pressing the
button to turn off the power.
To cancel the operation, press the CANCEL button in step 4, 5, or 7 until the display returns to the original display before editing the track.
Note: While “UTOCwriting” is displayed, do not disconnect the power cord or subject the Unit to the vibration to avoid in- correct recording.
Joining Tracks
(JOIN Function)
■Use the Unit to carry out this function.
■1. Insert an MD to be edited with its label side up.
■2. Press the MD6 button and then 7 button to set the function to MD.
The track numbers and total playback time are displayed.
■3. Press the EDIT button until "JOIN ?" is dis- played.
Each time you press the button, the display changes as follows.
Current display=DIVIDE=JOIN=MOVE=ERASE=ALL ERASE=(back to the beginning)
■4. Press the SET button.
■5. Select the track number to be joined.
Press the 4 or ¢ button or turn the JOG dial to select the track.
Track to be joined | Selected track |
■6. Press the SET button.
■7. Press the ENTER button.
The selected track and the previous track are joined and the number of tracks decreases by 1. The new total track number and the total playback time appear on the display.
■8. Press the 0MD button to complete editing.
The MD is ejected after “UTOCwriting” is displayed.
•You can also complete editing operation by pressing the
button to turn off the power.
To cancel the operation, press the CANCEL button in step 4, 5, or 6 until the display returns to the original display before editing the track.
Note: While "UTOCwriting" is displayed, do not disconnect the power cord or subject the Unit to the vibration to avoid in- correct recording.
Moving Tracks
(MOVE Function)
■Use the Unit to carry out this function.
■1. Insert an MD to be edited with its label side up.
■2. Press the MD6 button and then 7 button to set the function to MD.
The track numbers and total playback time are displayed.
■3. Press the EDIT button until "MOVE ?" is dis- played.
Each time you press the button, the display changes as follows.
Current display=DIVIDE=JOIN=MOVE=ERASE=ALL ERASE=(back to the beginning)
■4. Press the SET button.
Track to be moved
■5. Select the track number to be moved.
Press the 4 or ¢ button or turn the JOG dial to select the track.
Example: Track number 12.
■6. Press the SET button.
■7. Select the destination to which the track is to be moved.
To select the track number, press the 4 or ¢ button or turn the JOG dial to select the track.
In this example, the 12th track will move to the 14th track. (Since, the 12th track is lost, the upper tracks than the 12th one will be shifted toward the younger tracks.)
Destination track | Track to be moved |
■8. Press the SET button.
■9. Press the ENTER button.
The selected tracks are moved. The total track number and the total playback time appear on the display.
■10. Press the 0MD button to complete editing.
The MD is ejected after "UTOCwriting" is displayed.
•You can also complete editing operation by pressing the
button to turn off the power.
To cancel the operation, press the CANCEL button in step 4 through 8 until the display returns to the original display before ed- iting the track.
Note: While "UTOCwriting" is displayed, do not disconnect the power cord or subject the Unit to the vibration to avoid in- correct recording.
Erasing Tracks
(ERASE Function)
■Use the Unit to carry out this function.
■1. Insert an MD to be edited with its label side up.
17
