RD-MD5(B)-e.fm Page 5 Wednesday, December 2, 1998 11:40 AM

Common Operations

ACTIVE CLEAR SOUND

PHONES

DISPLAY

SUPER

 

WOOFER

 

 

VOLUME+,–

VOLUME+,–

 

ACTIVE CLEAR

 

MID/TREBLE

 

SOUND indicator

 

SUPER

ACS

DISPLAY

WOOFER

VOLUME+,–

/CHARA.

VOLUME+,–

STANDBY

 

 

indicator

MID+,–

TREBLE+,–

Turning the Power On and Off

Turning the System On ——————

Press the button.

The display comes on and the “STANDBY” indicator goes out. The System comes on ready to continue in the mode it was in when the power was last turned off.

or

For example, if the last thing you were doing was listening to a CD, you are now ready to listen to a CD again. If you wish, you can change to another source.

If you were listening to the Tuner last, the Tuner comes on play- ing the station it was last set to.

Turning the System Off ——————

Press the button again.

The "STANDBY" indicator lights up and the display is blank, ex- cept for the clock display.

For private listening

Connect a pair of headphones to the PHONES jack. No sound comes out of the speakers.

Be sure to turn down the volume before connecting or putting on headphones.

Adjusting the Super Woofer Vol- ume

You can adjust the bass level between BASS 1 (minimum) and BASS 6 (maximum). You can use this effect only for playback.

Press the SUPER WOOFER VOLUME + button to increase the bass level or press the SUPER WOOFER VOLUME – button to de- crease it.

oror

Note: This function is not effective when the headphones are in use.

or

Some power is always consumed even though power is turned off (called Standby Mode).

To switch off the System completely, unplug the AC power cord from the AC outlet. When you unplug the AC power cord, the clock will be reset to 0:00 after about 5 minutes, and preset Tuner stations will be erased after about 24 hours.

Adjusting the Volume

You can adjust the volume level between 0 and 50.

Press the VOLUME + button to increase the volume or press the VOLUME – button to decrease it.

When you keep pressed the VOLUME + or – button, the VOLUME indication changes rapidly.

CAUTION: DO NOT start playing any source with- out first setting the VOLUME control to minimum position, as a sudden blast of sound can damage your hearing, speakers and/or headphones.

Tone Control (MID/TREBLE)

You can control the tone by changing the mid and the treble be- tween –6 and +6. (0: Flat)

Using the Unit ———————————

1. Press the MID/TREBLE button to select MID or TREBLE.

Each time you press the button, the display changes as follows.

Current sound source (e.g. FM103.50MHz)=MID 0= TREBLE 0=(back to the beginning)

2. Press the VOLUME + or – button within 4 seconds to adjust the mid/treble level.

Using the Remote Control —————

Press the MID+ or MID– button to adjust the mid level between MID – and MID +6.

Press the TREBLE+ or TREBLE– button to adjust the treble level between TREBLE – and TREBLE +6.

5

Page 8
Image 8
JVC RD-MD5 Common Operations, Turning the Power On and Off, Adjusting the Super Woofer Vol- ume, Adjusting the Volume