JVC LT-32A1 dimensions Remote control buttons and functions, Initial Settings, Safety Precautions

ENGLISH

WIDE LCD PANEL TV INSTRUCTIONS

LT-32A1

© 2010 Victor Company of Japan, Limited	GGT0353-001A-H
	0610GLT-NF-MT

	Remote control buttons and functions
							Adjust Volume
20								1 Power On / Off	# Volume control / Turn off muting
					12	VOLUME	VOLUME	2 Colour buttons	[ For button side front will be displayed on-screen menu
								3 Turn on “Clear SD”	• When press and hold the button for 3 seconds,
			Clear SD					4 Turn on “Zoom”	on-screen menu will be displayed.
		2							• To exit, press and hold the button again for
	1		3		15			5 Turn on “Eco Mode”
						CHANNEL	CHANNEL		3 seconds. ]
			ZOOM
19	4	5	6					6 Turn on “Karaoke”	$ Function for viewing Teletext
								7 Favourite channel setting
			ECO	5					% To Teletext
	7	8	9
								8 Display on-screen menu
				6					& Change channel / Page / Hyper Scan
	RETURN+		KARAOKE
18		0						9 Operate the menu
				7	1				( Channel information
	TV/VIDEO		MENU					! To previous screen
									) Switch between TV / Video input
17				8
								" Turn on “Sound Meister”
									~ Return Plus / Return function
		OK		9			Microphone		+ Change channel / page
									, Turn the volume off / on

Initial Settings (continued)

If you select Country Area to “Area-1”

4Select the teletext language group.

Set Up	1. Select
> Teletext Language

Group-1	OK
Group-2
Group-3
Group-4
Group-5

5Automatically register channels (Auto Program).

OK Set Up

> Auto Program

CH 40

5%

If you select Country Area to “Area-2”

4Select Air or Cable.

	1. Select
Set Up	OK

> Auto Program	2. Set
Air
Cable

5Searching for the channels (Auto Program)

Set Up

>> Auto Program

CH 40

5%

Safety Precautions

Thank you for buying this JVC LCD panel television.

To make sure you understand how to use your new TV, please read this manual thoroughly before you begin.

DISPLAY	BACK	10
16		11	Zoom : Change the aspect ratio				V-Scroll
CH	VOL							When 720p or 1080i or 1080p signal
							•
15		12				1. Select		is received, “Full” and “Slim” can be
			Picture				16:9 Zoom	selected.
			Zoom		OK
	MODE		Auto	Panoramic			• In PC mode, “Regular” and “Full” can
		13
						2. Set
			Regular					be selected.
			Panoramic

6 Check what was registered. 6 Check what was registered.

Set Up OK Set Up OK

> Edit				> Channel Summary
PR	ID	CH / CC		CH / CC	ID	Skip
01	– – – – – –	CH 02		CH 02	– – – – – –
02	– – – – – –	CH 03	• If you want to edit channel, follow Edit	CH 03	– – – – – –	• If you want to set undesired channels
03	B B C A B C	CH 47		CH 04 B B C A B C
04	A B C D E F	CH 76		CH 05	A B C D E F
05	– – – – – –	CH 12	function in Set Up menu.	CH 06	– – – – – –	to be skipped, follow Channel Summary
06	– – – – – –	CH 09		CH 07	– – – – – –

•Follow this manual regarding setup!

-- Connect only to a 110-240 V, 50/60Hz AC outlet.

•Make enough room for inserting and removing the power plug!

•Place the TV as close to the outlet as possible!

-- The main power supply for this TV is controlled by inserting or removing the power plug.

•Never cut or damage the power cord!

-- If the AC plug is not the right shape, or the power cord is not long enough, use an appropriate plug adapter or extension cable. (Consult your retailer)

•Unplug the power cord when going out!

-- The power buttons on the remote control and the TV unit cannot completely turn off the TV. (Make appropriate arrangements for bedridden people.)

•Do not allow the TV to fall!

-- Do not rest your elbows on, or allow children to hang from the TV. -- There is a risk that the TV will fall and cause injuries.

-- Make use of the hole on the back of the stand to prevent the TV from falling easily.

• If the TV is damaged or behaving strangely, stop using it at once!

-- Unplug the power cord and contact your retailer.

•Never place anything on the TV!

-- Placing liquid, naked flames, cloths, paper, etc. on the TV may cause a fire.

•Never expose to rain or moisture!

-- To prevent fire or electric shock, never allow liquids to enter the unit.

• Never insert objects into the cabinet openings!

-- It may cause a fatal electric shock. -- Take care when children are near.

• Hold the TV so as not to scratch the screen!

-- Do not touch the screen when carrying the TV.

• Do not carry the TV on your own!

-- In order to prevent accidents, ensure that the TV is carried by two or more people.

•For more details on installation, usage and safety ➔ Consult your retailer.

•	Never insert the power cord by wet hand!
•	-- It may cause a fatal electric shock.
	Keep the TV set away from direct sunlight!
•	-- TV set can be damaged.
	Place the TV set in a neat and dry place. Do not place the
	product close to source of steam, heat, moisture or oil.
•	Because it may cause a fire hazard or electric shock hazard!
	Don’t touch an external metal part of the TV set!
•	-- It may cause an electrocuted.
	For keep a distance from potential ignition	10	10
	sources to the components or part in side TV
	set, customer should install TV set with a stand
•	within ± 10 perpendicularly degree.
	Never dismantle the rear panel!
•	-- It may cause an electric shock.
	Never obstruct the ventilation holes!

-- It may cause overheating or a fire.	Plane
• Handle LCD panel with care!
-- Use a soft, dry cloth when cleaning.

• Never try repair the TV yourself!

-- If the problem cannot be solved in “Troubleshooting” unplug the power cord and contact your retailer.

• If a television is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries, particularly to children, can be avoided by taking simple precautions such as:

-- Using cabinets or stands recommended by the manufacturer of the television.

-- Only using furniture that can safely support the television.

-- Ensuring the television is not overhanging the edge of the supporting furniture.

-- Not placing the television on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the television to a suitable support.

-- Not standing the television on cloth or other materials placed between the television and supporting furniture.

-- Educating children about the dangers of climbing on furniture to reach the television or its controls.

• To prevent accidents, firmly attach the TV stands to the TV shelf before using microphone.

• Make sure that the subwoofer is in good condition before installing it on the TV.

-- If the subwoofer has leakage current, it may damage the TV or cause electric shock.

		14:9 Zoom	Move the picture with 3 or 4
14		16:9 Zoom
		16:9 Zoom Subtitle
	RM-C2022	Full	while this bar is displayed.
	LCD	Hyper Scan :

CH

Press and hold . PR changes without changing the picture screen.

Once you release the button, the picture of the selected PR will appear.

Return Plus : Return to the frequently viewed channel.

Return Plus Programmed by select the frequently viewed channel then press and hold RETURN+ .

Return Plus Canceled by press and hold RETURN+ .

Return : Return to the previously viewed channel.

Favourite channel setting.
1. Register the favourite channel		2. Recall the favourite channel
Set 1-4 ?	Press number	Favourite 1-4 ?	Press number
	button (1-4 only)		button (1-4 only)
Press and hold		Press
Programmed! will be displayed.		• If the favourite channel has not been registed then “ No memory “ will
		be displayed.
• Insert the batteries	“AAA/R03”	WARNING:
Use two “AAA/R03” dry cell batteries.	Batteries		If this symbol is shown,
Insert the batteries from the · end,		Batteries shall not be exposed	it is only valid in the
		to excessive heat such as direct
making sure the · and ª polarities			European Union.
		sunshine, fire or the like.
are correct.

WARNING:

To prevent the spread of fire, keep candles or other open flames away from this product at all times.

Initial Settings

07	– – – – – –	CH	05	CH	08	– – – – – –	Yes	function in Set Up menu.
08	– – – – – –	CH	02	CH	09	– – – – – –	Yes
09	– – – – – –	CH 15		CH 10		– – – – – –
10	– – – – – –	CH 28		CH 11		– – – – – –

Using the TV’s Menu ---> Area - 1

-%.5	Display MENU.				2 / 3 Select Main menu.
			Picture Mode	Soft	(Picture / Sound / Features / Set Up)
					5 / ∞ Select sub menu.
			Picture		2 / 3 Change setting.
			Backlight
			Contrast		When 3 is shown.
			Brightness
			Sharpness		3 Display function setting.
			Colour	Warm
			White Balance		5 / ∞ Select function.
			Tint		2 / 3 Change setting.
			Features
-%.5	or 466)$%/ Exit from Menu.	OK	Confirm after setting.

•Please see “Menu operation guide” at the bottom of menu on-screen.

Picture Mode

Select the picture as you like. (Standard / Soft / Bright)

On Timer

Turns on the TV from standby mode.

Picture

Backlight

Darker <--> Brighter

Features

PR

Select a channel. (01 - 99)

Contrast

Lower <--> Higher

On Timer Set a time. (00:00 - 12:00)

Brightness

Darker <--> Brighter

Sleep Timer

Turns off the TV to standby mode. (Off / 10 / 20 / ...120)

Sharpness

Softer <--> Sharper

Channel Guard

Stop children from watching specific channels.

Colour

Lighter <--> Deeper

Blue Back

Display a blue screen and mute the sound when the

Tint

Reddish <--> Greenish *Only NTSC

signal is weak or absent. (Off / On)

White Balance

Select the white balance of the picture. (Cool / Mid / Warm)

Child Lock

Disables the side control buttons of the TV. (Off / On)

Features

Finer picture adjustment

Auto Shutoff

Set the power to turn off if no TV signal (RF) is

Clear SD

For clearly picture (Off / Mode-1 / Mode-2)

received and no operation is performed for about 15

Digital VNR

Reduces the amount of noise in original

minutes. (Off / On)

Colour Management

picture. (Off / On)

Favourite Setting

Delete the favourite channel that you registered by

(Blue)

.

For natural - looking pictures. (Off / On)

Picture Management

Fix bright / dark pictures. (Off / On)

Power Lamp

Sets power lamp lighting while the TV is on. (Off / On)

Dynamic Backlight

Reduces the brightness of the backlight

Eco Mode

Adjust picture contrast to match your room brightness.

when the screen is dark. (Off / On)

Colour System

(Off / Eco-1 / Eco-2 / Max-Eco)

Select an appropriate colour system.

(Auto / PAL / SECAM / NTSC 3.58 / NTSC

Auto Program

Automatically registers channels.

Zoom

4.43 / PAL-M / PAL-N)

Up

Edit / Manual

Move

Move a channel position by 2 and Adjust

Change the aspect ratio.

by 3 / 4.

(Auto / Regular / Panoramic /14:9 Zoom /

Set

ID

Edit a channel name

by (Red) .

Stereo / I■II

16:9 Zoom / 16:9 Zoom Subtitle / Full)

Select the stereo, mono or bilingual language.

Insert

Insert a channel by

(Green)

.

Sound

(I / II / O / m / Mono)

Select a CH/CC by 3 / 4.

Sound Meister Set sound theme to match your listening source.

Enter number by 0-9 buttons.

Bass

(Off / Dynamic / Pure / Living)

Delete

Delete a channel by (Yellow).

Compensates low frequencies to widen the

Manual

Register a new channel by (Blue) .

frequency band. (Weaker <--> Stronger)

Care when setting

■■ Power requirements		200 mm		• If the microphone is installed,	• To prevent the TV from falling thread the
•	Connect the power cord			should be lock it’s cable follow	belt through the hole on the back of the
	only to a 110-240V, 50/60Hz			picture.	stand and secure it to the TV rack.
	AC outlet.				Hole for belt
■■ Installation requirements
•	To avoid overheating,
	ensure the unit has ample	150 mm 50 mm	150 mm	50 mm	Belt
	room.
					(not provided)
					Screw (not provided)

* Please see how to set up the TV and connection in GGT0356-001A-H.

1

1 Turn on the TV. 2 Select a language. 3 Select Country Area.

MENU		1. Select		1. Select
> Language			> Country Area
Set Up			Set Up
English	ไทย		Area - 1
JVC logo appears	Português		Area - 2
	Tiếng Việt	OK		OK
Français	Melayu	2. Set		2. Set
Українська	Pусский
• Show only when powering on for the first time.	Castellano

•The power on the unit can also be used.

• The select the new Country Area after Initial Setting has completed.			Area-1	: Asia, Middle East, Europe, Oceania, Africa
-%.5		(While the cursor is pointing to Picture menu	Area-2	: South America, Philippines
	1
		and hold for 3 seconds.)

2

Treble		Compensates high frequencies to widen the		Beginning channel search by	(Red)	and	(Green)		.
Surround		frequency band. (Weaker <--> Stronger)
		Expands the stereo sound naturally.		Channel fine tunning by (Yellow) and (Blue) .
Balance		(Narrower <--> Wider)		If the picture or sound is unnatural by
	Left Stronger <--> Right Stronger			for select a system.
Voice Enhancer	Uses sound enhancement technology. (Off / On)		Language
				Select your desired on screen display language.
Al Volume	Prevent sudden increase or decrease of sound. (Off / On)
Subwoofer Out	Chooses to connect subwoofer. (Off / On)		Video-2 Setting	Switch between video and component signal.
Subwoofer Level	Adjusts sound level of your subwoofer.			(Video / Component)
	(Lower <--> Louder)		Rocket Start	TV can turn on quickly. (Off / On)
	• When Subwoofer Out set to On, you can adjust			• When Rocket Start is On, power consumption at
	Subwoofer Level.
Karaoke				standby mode will more than normal standby mode.
	You can enjoy to reduce the vocals for your own karaoke.		Teletext
				Select Teletext language group.
Karaoke		Chooses to reduce the vocals.
Main Volume		(Off / Mode-1 / Mode-2)	Language	(Group-1 / Group-2 / Group-3 / Group-4 / Group-5)
		Adjusts volume level. (Lower <--> Louder)	HDMI Setting	Setting for HDMI input. (Size / Audio)
Microphone Volume		Adjusts volume level of microphone.	PC Setting	Setting for PC input. (Auto / PC Position / Phase / Pixel)
		(Lower <--> Louder)			(continued)			3

	Using the TV’s Menu ---> Area - 2
	Picture Mode	Select the picture as you like. (Standard / Soft / Bright)
Picture	Backlight	Darker <--> Brighter
	Picture	Lower <--> Higher
	Brightness	Darker <--> Brighter
	Detail	Softer <--> Sharper
	Color	Lighter <--> Deeper
	Tint	Reddish <--> Greenish *Only NTSC
	White Balance	Select the white balance of the picture. (Cool / Mid / Warm)
	Features	Finer picture adjustment
	Clear SD	For clearly picture (Off / Mode-1 / Mode-2)

	On Timer	Turns on the TV from standby mode.
Features		CH	Select a channel. (Air : CH02 - CH69 ,
			Cable : CC01 - CC125)
	Sleep Timer	On Timer Set a time. (00:00 - 12:00)
		Turns off the TV to standby mode. (Off / 10 / 20 / ...120)
	Channel Guard	Stop children from watching specific channels.
	Blue Back	Display a blue screen and mute the sound when the
	Child Lock	signal is weak or absent. (Off / On)
		Disables the side control buttons of the TV. (Off / On)
	Auto Shutoff	Set the power to turn off if no TV signal (RF) is
		received and no operation is performed for about 15

Useful functions (continued)

Eco Mode : Adjusts picture contrast according to the brightness of your room to reduce power consumption.

Off	: Deactivates the function
Eco-1	: Picture is darkened for the 1st level.
Eco-2	: Picture is darkened for the 2nd level (more than the 1st level).

Max-Eco :Only sound is available, no picture (this is to save energy in such situation as when you want to listen to the news while doing other house works at the same time).

-After choosing Eco Mode as Max-Eco and exiting the Menu, picture will go off in 3 seconds.

-When you want the picture to appear again, press any button on the remote control then function will be reset back to “Off”.

-After unplugging the TV or press “Power off” button, this function will be reset back to “Off”

Technical information

Sound and Colour system in your country or region

Area	Country or Region	System System
	Bahrain, Kuwait, Oman, Qatar, United Arab Emirates,
	Yemen, Indonesia, Malaysia, Singapore, Thailand,	B/G
Asia,	India, etc.		PAL
Middle	China, Vietnam, etc.	D/K
East	Hong Kong, etc.	I
	Islamic Republic of Iran, Lebanon, Saudi Arabia, etc.	B/G	SECAM
	Philippines, Taiwan, Myanmar, etc.	M	NTSC

What is “Clear SD”

LCD picture is unstable due to a large number of signal noise. Such noise appears extensively especially when an LCD displays SD signals. Clear SD mode resolves disadvantage for better picture quality.

	Digital VNR		Reduces the amount of noise in original
	Color Management		picture. (Off / On)
			For natural - looking pictures. (Off / On)
	Picture Management		Fix bright / dark pictures. (Off / On)
	Dynamic Backlight		Reduces the brightness of the backlight
	Color System		when the screen is dark. (Off / On)
			Select an appropriate color system.
	Zoom		(Auto / NTSC 3.58 / PAL-M / PAL-N)
			Change the aspect ratio.
			(Auto / Regular / Panoramic /14:9 Zoom /
			16:9 Zoom / 16:9 Zoom Subtitle / Full)
	MTS	Select the stereo and SAP broadcasted programs.
		(Stereo / SAP / Mono)
Sound
	Sound Meister Set sound theme to match your listening source.
	Bass	(Off / Dynamic / Pure / Living)
			Compensates low frequencies to widen the
			frequency band. (Weaker <--> Stronger)
	Treble
			Compensates high frequencies to widen the
	Surround		frequency band. (Weaker <--> Stronger)
			Expands the stereo sound naturally.
	Balance		(Narrower <--> Wider)
		Left Stronger <--> Right Stronger
	Voice Enhancer	Uses sound enhancement technology. (Off / On)
	Al Volume	Prevent sudden increase or decrease of sound. (Off / On)
	Subwoofer Out Chooses to connect subwoofer. (Off / On)
	Subwoofer Level Adjusts sound level of your subwoofer.
		(Lower <--> Louder)
		• When Subwoofer Out set to On, you can adjust
	Karaoke	Subwoofer Level.
		You can enjoy to reduce the vocals for your own karaoke.

minutes. (Off / On)

Favorite Setting Delete the favorite channel that you registered by (Blue) .

Power Lamp Sets power lamp lighting while the TV is on. (Off / On)

Eco Mode Adjust picture contrast to match your room brightness. (Off / Eco-1 / Eco-2 / Max-Eco)

	Auto Program	Automatically registers channels.
Up	Channel	Skip	Skip the channel by (Red) .
	Summary	Cancel	Cancel the skip channel by (Green).
Set		ID	Edit a channel name by (Yellow).
		• Channels are to be skipped cannot be selected by
		the CHANNEL - / + button.
		• The skip can be set to all channels of Air (CH02 -

CH69) and Cable (CC01 - CC125).

Language Select your desired on screen display language. Video-2 Setting Switch between video and component signal.

(Video / Component)

Rocket Start TV can turn on quickly. (Off / On)

•When Rocket Start is On, power consumption at standby mode will more than normal standby mode.

Closed Caption Select the desired caption or text channel.

Closed	Select to view close caption or text
Caption	information. (Off / CC / Text)
Caption	Select the desired caption.
Text	(CC1 / CC2 / CC3 / CC4)
	Select the desired text channel.

(T1 / T2 / T3 / T4)

•Closed Caption is not available for component signal.

Viewing Teletext

You can watch the Teletext broadcast channel with Text Functions.

1 TV mode <--> TEXT mode

2 Select a Teletext page by press number button (0-9).

•Move up or down a page by CHANNEL +/-.

List Mode : Book mark your favourite page.

MODE	(Red) (Green) (Yellow) (Blue)	for select to save
	Press number button
	for enter the number	save
	of page.

	• Recall your favourite page by press the colour button.
Hold	: Hold the current page.
	• Cancel by press this button again.
Reveal	: Display hidden information.
	• example : answer to a quiz, etc
Size	: Double the size of the displayed text.
Index	: Returns to page “100” or a previously designated page.
Cancel	: Leave the current page open, while you switch to watch TV.
	• Useful when running a page search.
Sub-page	: Display the number of Sub-page.
	• Cancel by press this button again.

Watching Video or DVDs

1 Select the input source.

		AV Select		1.	Select
466)	$%/	0	01
		1	Video-1
				OK
		2	Video-2
		3	HDMI	2.	Set
		4	PC

•Operate the connected device and play video.

2 Select “Set Up” Menu.

HDMI setting	: Setting for HDMI input.
Size	: Auto / 1 / 2
	If wrong screen size appears in 480p (525p),
	change to “1” or “2”.
Audio	: Auto / Digital / Analogue
	If no sound, change to “ Analogue “ or “ Digital”.
PC Setting	: Setting for PC input.
Auto	: Automatic adjust by 2.
PC Position	: Adjust screen position by 3 / 4.
	And set by OK .
Phase	: Sets the focus of screen.
Pixel	: Adjusts the horizontal feature of screen.

	Russia, etc.	D/K	SECAM
Europe	Czech Republic, Poland, etc.
	Germany, Holland, Belgium, etc.	B/G	PAL
	UK, etc.	I
Oceania	Australia, New Zealand, etc.	B/G	PAL
	Republic of South Africa, etc.	I	PAL
Africa	Nigeria, etc.	B/G
	Egypt, Morocco, etc.		SECAM
	Agentina, Paraguay, Uruguay	N	PAL
South	Brazil	M
America	Chile, Peru, Bolivia, Colombia, Venezuela,	M	NTSC
	Ecuador, etc.

PC Signals that can be displayed

•If the signal doesn’t appear, check that the vertical frequency on the PC is set to “60Hz”.

Resolution	640 x 480 (VGA) / 1024 x 768 (XGA)
Vertical frequency	60.0

*Machintosh* computers are not supported.

(Machintosh is a registered trademark of Apple Computer, Inc.)

No use “Clear SD” Use “Clear SD”

Connect “DVI” devices

Connect a “DVI” device to “HDMI” using “DVI-HDMI” conversion cable. Connect analogue sound output of the DVI device to L and R terminals in INPUT VIDEO-2.

• Set “Audio” in “HDMI Setting” to “Analogue” or “Auto”.

	Language group for Teletext
Group	Languages
Group-1	Turkish, Hungarian, English, German, French, Italian, Spanish,
	Portuguese, Greek, Swedish, Finnish
Group-2	Polish, Serbian, Croatian, Slovenian, Czech, Slovak, Rumanian,
	German, French
Group-3	Russian, Bulgarian, Lettish, Lithuanian, Estonian, Ukrainian,
	Serbian, Croatian, Slovenian, Czech, Slovak, English, German
Group-4	Arabic, Hungarian, English, German, French, Italian, Spanish,
	Portuguese, Swedish, Finnish
Group-5	Farsi, Hungarian, English, German, French, Italian, Swedish,
	Finnish

•If the characters are unreadable. ➡ Select different Teletext language group.

Karaoke	Chooses to reduce the vocals.
Main Volume	(Off / Mode-1 / Mode-2)
	Adjusts volume level. (Lower <--> Louder)
Microphone Volume	Adjusts volume level of microphone.
	(Lower <--> Louder)

HDMI Setting Setting for HDMI input. (Size / Audio)

PC Setting Setting for PC input.

(Auto / PC Position / Phase / Pixel)

* Please see CH/CC List in GGT0356-001A-H.

Troubleshooting

If a problem occurs when you are using the TV, check the below troubleshooting guide before calling for repair.

Specification

Main unit

Terminals / Connectors

Useful functions

Channel Guard : Stop children from watching specific channels. 1 Select “Channel Guard”

			1.	Select a number
0	Features
	> Set ID No.	OK	2.	To the next column
	0	0 0 0	3.	Set

2 Select a channel and lock it ( : locked)

				1. Select a	Lock / Release
	Features				(Blue)
>> Channel Guard				channel
		CH / CC
PR	ID			OK
01	SAT	CH	02
02	– – – – – –	CH	05
03	BBC	CH	47
04	IEEE	CH	09
05	APL	CH	11
06	DANY	CH	07
07
08
09
10

•View a locked channel by use the numerical buttons to enter the channel

number. When appeare, press “Display” button and enter your “ID No.”

Subwoofer out : You can enjoy subwoofer sound from Subwoofer out.

1 Select “Subwoofer Out”

Sound 1. Select

Stereo / I II	I II	Mono
Sound Meister		OK	2. Adjust
Balance
Voice Enhancer	Off		3. Finish
AI Volume	Off
Subwoofer Out	On
Subwoofer Level
Karaoke

Chooses to connect subwoofer. (Off / On)

•When Subwoofer Out set to On, you can adjust Subwoofer Level.

•Subwoofer to be used must have a built-in amplifier.

Karaoke : You can enjoy to reduce the vocals for your own karaoke.

1Select “Karaoke”

Sound			1.	Select
Karaoke		OK	2.	Adjust
Karaoke	Off
			3.	Finish
Main Volume
Microphone Volume
Karaoke	Chooses to reduce the vocals.
	Off	: Normal sound of song
	Mode-1	: Only sound of music
	Mode-2	: To sing, accompanying with sound of song

•Karaoke function works only for stereo sound system.

•If using Karaoke disc, users must choose to remove the vocals from the player.

Main Volume Adjusts volume level. (Lower <---> Louder) Microphone Volume Adjusts volume level of microphone.

(Lower <---> Louder)

•Microphone Volume is available when plug in microphone.

•Microphone to be used with the “Karaoke” function of JVC must be of “HIGH GRADE LOW NOISE MICROPHONE CABLE” type; otherwise, noise will result.

Freeze : Take snapshots of the screen.

1 OK Cancel

	Press “ OK ” again,
Freeze	or change the
	channel.
still picture

•You cannot save or export the snapshot.

•Freeze function is not available for HDMI, PC and Component signal.

4

Severe noise or snow

Check the aerial cable and TV connections .

Check the direction of the aerial.

Check the aerial or its cable damaged or not.

Patterns, stripes or noise

Interference caused by devices such as an amplifier, personal computer, or a hair drier, Move it away from TV.

Ghosting (Doubling of images)

Interference occurs caused by signal reflection from mountains or building. Try to adjust the aerial’s direction or use another antenna.

Cannot turn it on

Ensure the power cord is connected to the AC outlet correctly.

Cannot operate the remote control.

The batteries may be exhausted. Replace with new batteries.

Ensure that you are operation the remote control at less than 7 meters from the front of your TV.

Remote control stops working

Unplug TV, several minutes later plug it in again.

Side control buttons do not work

Switch “Child Lock” to “Off”.

Aspect ratio changed unintentionally

Press “ ZOOM ” button to return to your settings.

PC screen alignment is off

Adjust the “PC Position” in “PC Setting” of Set Up menu.

Blue screen appears on the screen

Switch “Blue Back” to “Off”.

Strange picture when using an external device

If the top of the image is distorted, check the video signal quality itself. If movement appears unnatural when receiving a signal from a DVD player, etc. with 625p (progressive-scanning), change the output setting of the external device to 625i (interlace-scanning).

Poor picture quality

Unnatural colour >> Adjust “Colour” and “Backlight”.

Check “Colour System”. If “Auto” is selected. Select the specific colour system manually.

Poor sound

Adjust the “Bass” and “Treble”.

If receiving a poor signal in “Stereo/I■II” switch to “Mono”. Adjust the channel reception using “Manual”.

For HDMI signal, wrong screen size.

Switch “Size” in “HDMI Setting” to “1” or “2”.

For HDMI signal, green and distorted screen

Wait a little for the signal to stabilize when switching the signal format for an “HDMI” device.

For HDMI signal, No picture / No sound

Use the cable marked with HDMI logo. Check if the device is compliant with HDMI.

Switch “Audio” in “HDMI Setting” to “Digital” or “Auto” for HDMI devices, or “Analogue” or “Auto” for DVI devices.

Some functions do not work.

It is not a malfunction. Some functions (dark background) in the menu do not work depending on the situation.

Black or white dots appear on the screen.

LCD panels use fine dots (“pixels”) to display images. While more than 99.99% of these pixels function properly, a very small number of pixels may not light, or may light all the time. It is not a malfunction.

No picture, No sound

Some input do not output from OUTPUT terminal.

Subwoofer, No sound

May be signal source is not low frequency bass signal.

Check subwoofer cable connected correctly.

Feedback sound symptoms

Keep the microphone away from the TV’s speakers.

Echo

Lower the sound level in “Microphone Volume” in order to prevent the echo.

5

Broadcasting systems	Area-1	B / G / I / D / K / M / N
	Area-2	M / N
	Area-1	PAL / SECAM / NTSC 3.58 / NTSC 4.43 /
Colour systems		PAL-M / PAL-N
	Area-2	NTSC 3.58 / PAL-M / PAL-N
		VHF low channel (VL) = 46.25 to 140.25 MHz
	Area-1	VHF high channel (VH) = 147.25 to 423.25 MHz
Channels and		UHF channel (U) = 431.25 to 863.25 MHz
	Area-2	VHF low channel (VL) = 55.25 to 127.25 MHz
frequencies		VHF high channel (VH) = 133.25 to 361.25 MHz
		UHF channel (U) = 367.25 to 801.25 MHz
	Receives	cable channels in mid band (X to Z+2, S1 to S10),
	super band (S11 to S20) and hyper band (S21 to S41)
Sound-multiplex	NICAM (I / B / G / D / K ), A2 (B / G / D / K)
systems	MTS (Multi-channel Television Sound)
Teletext systems	FLOF (Fastext), WST (World System Teletext)
Power requirements	AC 110 V - 240 V, 50/60Hz
Audio output		6 W + 6 W
(Rated power output)
Speakers		(4 cm x 16 cm) x 2
Power consumption		105 W
[standby]
		[0.7 W]
[“Rocket Start” mode
		[16 W]
standby]
Screen size
(visible area size		80 cm
measured diagonally)
Dimensions		791.8 x 571.7 x 203.5
(W x H x D: mm)
		[791.8 x 520.5 x 103.9]
[without stand]
Weights		15 kg
[without stand]		[12 kg]
	Power cord x 1
Accessories	Remote control unit : RM-C2022 x 1
	AAA/R03 dry cell battery x 2
	Screw x 8

Terminal name		Terminal type	Signal type (IN)
	VIDEO-1	RCA connectors x 3	Composite video, Audio L/R
		RCA connectors x 5	Composite video, Analogue
			component 480i (525i) / 576i (625i),
			Progressive : 480p (525p) / 576p
	VIDEO-2		(625p),
			HD : 720p (750p) / 1080i (1125i) /
			1080p (1125p)
			Audio L/R
Input		HDMI connector x 1	HDMI 480i (525i) / 480p (525p) /
	HDMI		576i (625i) / 576p (625p) / 720p
terminals
			(750p) / 1080i (1125i) / 1080p
			(1125p)
	PC INPUT	D-SUB (15 pins) x 1	Analogue PC signal
	HDMI Analog /	RCA connectors x 2	Audio L / R
	DVI Analog / PC
	Audio
		mini-jack x 1
	Microphone	(3.5 mm in	Microphone input
		diameter)

•HDMI Analog / DVI Analog / PC Audio use terminal common with VIDEO-2.

•We may change the design and specifications without notice.

•HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries.

6