[PRESET LEVEL] Preset Level setting knob

For setting the center value of the 4-f/stops (approximately) range when the [IRIS MODE] switch is set to APRESETB.

●Example

 

 

Center Value

C・・・・16・・・・・11・・・・8・・・・

 

 

・・・・4・・・・2.8・・・・1.4

5.6

(Close)

 

 

 

 

 

 

(Open)

 

4-f/stops

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Variable Range

 

Close End

 

 

 

 

Open End

LIris F Value Display

Displays the camera's iris F value.

The iris F display on this unit shows the iris F value that is obtained from the camera.

●The display is updated at regular intervals.

●This is displayed as A- - -Bif the camera does not support this function, or if the information at the camera's end is not defined or undetected.

Display Example

CLOSE

F4

F16

F2.8

F11

F2

F8

OPEN

F5.6

Not

supported

M[IRIS/AUTO IRIS LEVEL] Iris/Auto Iris Setting Lever

The function varies according to the setting of [IRIS MODE].

Setting of [IRIS

Function

MODE]

 

 

 

FULL

For adjusting the iris level.

 

(CLOSE-OPEN)

 

 

PRESET

For adjusting the iris level of any 4-

 

f/stops (approximately) range.

 

(CLOSE-OPEN)

 

 

AUTO

For adjusting the auto iris level.

 

(OVER-UNDER)

 

 

Memo:

●When the [IRIS MODE] is set to AAUTOB, you can choose not to adjust the auto iris level (standard fixed auto iris level). (A 24 page)

Note:

●The lever may become tighter when this unit is used at cold regions.

●When in OPERATE ON mode, iris value is reflected to the camera on the IRIS lever position.

N[MASTER BLACK] Master Black Setting Knob

For adjusting the pedestal level (master black) as the reference black.

 

OVER

OPEN

 

Lowers the

AUT

 

Raises the pedestal

pedestal level.

IR

IS

level.

LEV

 

 

UNDER

CLOSE

 

 

 

MASTER

 

 

 

BLACK

 

Note:

●The knob may become tighter when this unit is used at cold regions.

O[TALLY] Tally Indicator

When there is input of tally signals into the tally terminal V at the rear of this unit, the indicator lights up.

The light of the indicator varies according to the type of tally signal input.

TALLY PGM input

:

Red light

TALLY PVW input

:

Green light

Note:

●When there is input of both TALLY PGM and TALLY PVW signals, priority is given to TALLY PGM, and the red light is lit.

11