Gain Settings
For specifying the gain settings.
1 Press any of the gain value buttons.
●The selected gain value button lights up in orange, and the gain value button that was previously selected turns green.
0dB | 3dB |
| GAIN |
|
|
|
6dB | 9dB | 12dB | 15dB | 18dB | ||
Lit |
|
|
|
|
|
|
ALC | LOLUX | VARIABL |
| LEVEL | ||
|
| |||||
LEVEL | GAMMA |
| LEVEL | DETAIL | KNEE POINT | AUTO |
|
|
|
|
|
| KNEE |
[GAIN] Gain Selection Button
Setting Value | Function |
|
|
Sets gain to the displayed value. | |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
| |
|
|
Sets the gain value automatically. | |
|
|
Sets to the high sensitivity mode. | |
|
|
Sets to the variable gain mode. In this | |
| case, set the gain value using the [LEVEL] |
| knob. |
|
|
[LEVEL] Variable Gain Selection Button
This is the knob for setting the gain value when the [VARIABLE] gain button is selected.
The setting range varies according to the connected camera.
Memo:
●The gain values that can be selected vary according to the connected camera. For gain values that are not available at the connected camera, the light of the corresponding buttons are turned off and disabled.
●AALCB runs either in the mode when the gain value is automatically set (ALC), or when the gain value and shutter are automatically set (ALC+EEI), depending on the type of camera connected. When a connected camera allows running in both modes, you can select the mode to run using the DIP switch settings on this product. (A 24 page)
Gain Action | Shutter Operation |
|
|
ALC | Enables free selection. |
|
|
ALC+EEI | Shutter switches to the automatic |
| adjustment mode (EEI), and all |
| shutter button lights turn off and |
| their selection is disabled. |
|
|
Memo:
●When AALCB is selected, the [IRIS MODE] becomes
AAUTOB (factory setting) regardless of the switch settings of this product. However, it is possible to assign priority to the [IRIS MODE] switch settings of this product using the DIP switch settings. (A 24 page)
16