Loading a Scene File
3 Loading is complete.
●The [OPERATE] button switches back to a solid orange light, and the buttons and indicators of all other features are also lit according to their preset status.
OPERATE | LOCK | BARS |
PART
Lights up in
To call a preset scene file:
orange
OFF FULL
OPERATE |
|
| LOCK |
|
| BARS | |
|
|
| OFF FULL |
| [BARS] Button | ||
|
|
|
| PART |
|
|
|
Button |
| SCENE FILE |
|
|
| SPEED | |
| PART |
| SHUTTER |
|
|
| |
NORMAL | 1/100 | 1/250 | 1/1000 | 1/2000 | VARIABLE | ||
1/120 | 1/500 | ||||||
0dB |
|
| GAIN |
|
|
| |
Button | 3dB | 6dB | 9dB | 12dB | 15dB | 18dB | |
ALC | LOLUX | VARIABLE |
| LEVEL | |||
| LEVEL | GAMMA | LEVEL | DETAIL | KNEE POINT | AUTO | |
|
|
|
|
|
|
| KNEE |
| BLACK |
| WHITE BALANCE MODE |
| |||
| COMPRESS | STRETCH | MANUAL | PRESET | FAW | AW A | AW B |
| R | WHITE PAINT |
| PAINT | AUTO WHITE | ||
|
| B |
| ||||
|
| BLACK PAINT |
| PAINT | AUTO BLACK | ||
| R |
| B |
| |||
|
|
|
| PART |
|
|
|
|
|
|
| OVER |
| OPEN | |
| PRESET | IRIS MODE |
|
|
|
| |
| LEVEL |
|
|
|
| ||
|
|
| FULL | AUT |
|
| |
|
| PRE |
|
|
| ||
|
|
| IR |
| IS | ||
|
| SET | AUTO | LEV |
|
| |
|
|
|
|
|
|
| |
|
| FULL |
|
|
|
|
|
|
| TALLY |
|
|
|
|
|
| CALL | PREVIEW | UNDER |
| CLOSE | ||
|
|
|
|
| |||
|
|
|
|
|
| MASTER |
|
|
|
|
|
|
| BLACK |
|
|
| SCENE FILE |
| SPEED |
1 | 2 | 3 | 4 | 5 |
Memo:
●If another [SCENE FILE] button is already lit in orange when you are loading a scene file, this button switches to a solid green light.
Clearing a Scene File
To delete a preset scene file:
1 Check to ensure that the [SCENE FILE] button that contains the settings you want to recall is Alit in greenB .
Memo:
●No setting is stored in the scene file if the light of the corresponding [SCENE FILE] button is not lit. In this case, the following operation is disabled.
OPERATE |
| LOCK | BARS | |
|
| PART |
| |
|
| OFF | FULL |
|
|
| SCENE FILE |
| SPEED |
1 | 2 | 3 | 4 | 5 |
Lights up in |
|
|
|
|
green
2 Press the [SCENE FILE] button that contains the settings you want to recall.
●The [SCENE FILE] button and the [OPERATE] button blink in orange, and loading starts.
●After loading, initial communication with the camera is performed. During communication with the camera, the [SCENE FILE] button lights up in orange, while the [OPERATE] button blinks in orange. The light of all other buttons and indicators are automatically turned off.
OPERATE |
| LOCK | BARS | |
Blinking |
| PART |
| |
|
|
|
| |
|
| OFF | FULL |
|
|
| SCENE FILE |
| SPEED |
1 | 2 | 3 | 4 | 5 |
Blinking
1 Check to ensure that the [SCENE FILE] button that contains the settings you want to clear is Alit in orangeB or Alit in greenB.
Memo:
●No setting is stored in the scene file if the light of the corresponding [SCENE FILE] button is not lit. In this case, the following operation is disabled.
OPERATE |
| LOCK | BARS | |
|
| PART |
| |
|
| OFF | FULL |
|
Lit in orange or |
| SCENE FILE |
| SPEED |
1 | 2 | 3 | 4 | 5 |
green
2 Press and hold (for at least two seconds) the [SCENE FILE] button for which you want to clear the settings as well as the [BARS] button at the same time.
●The [SCENE FILE] button and the [OPERATE] button blink in orange, and clearing starts.
OPERATE |
| LOCK |
| BARS | |
Blinking |
| PART |
|
| |
|
| OFF | FULL |
| Press |
|
| SCENE FILE |
|
| |
|
|
|
| SPEED | |
1 | 2 | 3 | 4 | 5 | and |
hold
Press
20