Scene File
You can save various settings of this product according to the different shooting conditions as scene files. You can save up to five different scene files, and recall them simply by pressing the button.
You can also identify the status of the scene files based on the indicator light of the button.
Not lit | : | No scene file has been stored. |
Lights up in green | : | Scene files have already been |
|
| stored. |
Lights up in orange | : | Scene files are being called. |
You can use the buttons to store new scene files, or load/ clear preset scene files.
2 Press and hold the [SCENE FILE] button where the settings are to be stored for at least two seconds.
●The [SCENE FILE] button and the [OPERATE] button blink in orange, and storing starts.
OPERATE |
| LOCK | BARS | |
Blinking |
| PART |
| |
|
|
|
| |
|
| OFF | FULL |
|
|
| SCENE FILE |
| SPEED |
1 | 2 | 3 | 4 | 5 |
Press and hold
3 Storing is complete.
●The [OPERATE] button indicator switches back to a solid orange light, and the [SCENE FILE] button where the settings are stored also lights up in orange.
Storing a New Scene File
To save the current settings in the [SCENE FILE] button:
OPERATE |
|
| LOCK |
|
| BARS | |
|
|
| OFF FULL |
|
| ||
|
|
|
| PART |
|
|
|
Button |
| SCENE FILE |
|
|
| SPEED | |
| PART |
|
|
|
|
| |
|
|
| SHUTTER |
|
|
| |
NORMAL | 1/100 | 1/250 | 1/1000 | 1/2000 | VARIABLE | ||
1/120 | 1/500 | ||||||
0dB |
|
| GAIN |
|
|
| |
Button | 3dB | 6dB | 9dB | 12dB | 15dB | 18dB | |
ALC | LOLUX | VARIABLE |
| LEVEL | |||
| LEVEL | GAMMA | LEVEL | DETAIL | KNEE POINT | AUTO | |
|
|
|
|
|
|
| KNEE |
| BLACK |
| WHITE BALANCE MODE |
| |||
| COMPRESS | STRETCH | MANUAL | PRESET | FAW | AW A | AW B |
| R | WHITE PAINT |
| PAINT | AUTO WHITE | ||
|
| B |
| ||||
|
| BLACK PAINT |
| PAINT | AUTO BLACK | ||
| R |
| B |
| |||
|
|
|
| PART |
|
|
|
|
|
|
| OVER |
| OPEN | |
| PRESET | IRIS MODE |
|
|
|
| |
| LEVEL |
|
|
|
| ||
|
|
| FULL | AUT |
|
| |
|
| PRE |
|
|
| ||
|
|
| IR |
| IS | ||
|
| SET | AUTO | LEV |
|
| |
|
|
|
|
|
|
| |
|
| FULL |
|
|
|
|
|
|
| TALLY |
|
|
|
|
|
| CALL | PREVIEW | UNDER |
| CLOSE | ||
|
|
|
|
| |||
|
|
|
|
|
| MASTER |
|
|
|
|
|
|
| BLACK |
|
1 Check to ensure that the indicator light of the [SCENE FILE] button to register the settings is AOFFB or Alit in greenB.
Memo:
●A scene file is currently being called if the [SCENE FILE] button lights up in orange. In this case, the following operation is disabled.
| OPERATE |
|
| LOCK |
|
| BARS |
|
|
|
| PART |
|
|
|
|
|
|
| OFF FULL |
|
|
|
|
|
| SCENE FILE |
|
|
| SPEED |
Not lit or lit | 1 | 2 | 3 | 4 | 5 |
|
|
|
|
|
|
|
|
| |
in green |
| PART |
|
|
|
|
|
|
|
| SHUTTER |
|
|
| |
| NORMAL | 1/100 | 1/250 | 1/1000 | 1/2000 | VARIABLE | |
| 1/120 | 1/500 |
OPERATE | LOCK | BARS |
Lit | PART |
|
|
| |
| OFF FULL |
|
|
| SCENE FILE |
| SPEED |
1 | 2 | 3 | 4 | 5 |
Memo:
●If another [SCENE FILE] button is already lit in orange when you are storing a new scene file, this button switches to a solid green light.
19