Black Balance Adjustment
For specifying the black balance settings.
Setup:
●Set the [BARS] button to AOFFB.
Automatic Adjustment
1 Press [AUTO BLACK] (push once).
●The [AUTO BLACK] indicator lights up in orange.
●Auto black balance adjustment is performed and the value stored in the camera.
●After automatic adjustment is complete, the [AUTO BLACK] indicator lights up in green.
R | WHITE PAINT | B | PAINT | AUTO WHITE |
|
|
| ||
R | BLACK PAINT | B | PAINT | AUTO BLACK |
| ||||
|
|
| ||
Lit |
|
|
|
|
|
|
| PART |
|
Note:
●When error occurs during the automatic adjustment, the [AUTO BLACK] indicator lights up in green after blinking in orange for about 5 seconds. Identify the cause of the error (lens iris cannot be closed, etc.) and adjust again.
●The error is displayed on the viewfinder of the camera. For details on the display, refer to [INSTRUCTIONS] of the connected camera.
●The feature is not available on the camera if the [AUTO BLACK] button is not lit. In this case, auto black does not start up even if you press the [AUTO BLACK] button.
●When the [BLACK PAINT] is set to AONB, it changes to AOFFB after automatic adjustment is complete.
Manual Adjustment
Black Balance
1 Press [BLACK PAINT].
●The [BLACK PAINT] indicator lights up in orange.
2 Adjust the black balance value manually using the [BLACK PAINT R/B] knob.
R | WHITE PAINT | B | PAINT | AUTO WHITE |
|
|
|
|
| BLACK PAINT |
|
| Lit |
| R | B | PAINT | AUTO BLACK | |
Adjust |
| ||||
|
|
| |||
|
|
|
|
| |
manually |
|
|
|
|
|
|
|
|
| PART |
|
Note:
●The feature is not available on the camera if the [BLACK PAINT] button is not lit. Black balance cannot be adjusted in this case.
18