[KNEE POINT] Knee Point setting knob:
For adjusting the knee point setting manually when the auto knee button is turned AOFFB.
Decreases the knee | KNEE POINT |
Increases the knee | |
point. | point |
Note:
●The feature is not available on the camera if the light of the corresponding button is not lit. Control using this unit is disabled in this case.
S[BARS] Video Output Control Button and Indicator Light
ON | : | Outputs the color bar signals. |
(Orange light on) |
|
|
OFF | : | Outputs the camera's video |
(Green light on) |
| signals. |
|
|
Note:
●The feature is not available on the camera if the light of the corresponding button is not lit. Control using this unit is disabled in this case.
Rear/Side of Remote Control Panel
T U V
OPERATE |
|
| LOCK |
|
| BARS |
|
|
|
| PART |
|
|
|
|
|
|
| OFF FULL |
|
|
| |
| SCENE FILE |
|
|
| SPEED |
| |
1 | 2 | 3 | 4 | 5 |
|
|
|
| PART |
| SHUTTER |
|
|
|
|
NORMAL | 1/100 | 1/250 | 1/1000 | 1/2000 | VARIABLE |
| |
1/120 | 1/500 |
| |||||
0dB |
|
| GAIN |
|
|
|
|
3dB | 6dB | 9dB | 12dB | 15dB | 18dB |
| |
ALC | LOLUX | VARIABLE |
| LEVEL |
| ||
|
|
| |||||
LEVEL | GAMMA | LEVEL | DETAIL | KNEE POINT | AUTO |
| |
|
|
|
|
|
| KNEE |
|
BLACK |
| WHITE BALANCE MODE |
|
| |||
COMPRESS | STRETCH | MANUAL | PRESET | FAW | AW A | AW B | W |
R | WHITE PAINT |
| PAINT | AUTO WHITE | |||
| B |
|
| ||||
R | BLACK PAINT |
| PAINT | AUTO BLACK |
| ||
| B |
|
| ||||
|
|
| PART |
|
|
|
|
|
|
| OVER |
| OPEN |
| |
PRESET | IRIS MODE |
|
|
|
|
| |
LEVEL |
|
|
|
|
| ||
|
| FULL | AUT |
|
|
| |
| PRE |
|
|
|
| ||
|
| IR |
| IS |
| ||
| SET | AUTO | LEV |
|
|
| |
|
|
|
|
|
|
| |
| FULL |
|
|
|
|
|
|
| TALLY |
|
|
|
|
|
|
CALL | PREVIEW | UNDER |
| CLOSE |
| ||
|
|
|
|
| |||
|
|
|
|
| MASTER |
|
|
|
|
|
|
| BLACK |
|
|
TCable
Cable for connecting to the camera. (Cable length: 5 m)
U[PREVIEW]Preview Terminal (Output)(A 22 page)
This is the terminal for sending output to the make contact when you press and hold the [PREVIEW] button Q.
V[TALLY]Tally Terminal (Input)(A 22 page)
This is the terminal for inputting tally signals, such as those from the image switch that the controlled camera is connected to.
Connects the tally signal when the controlled camera is selected as the program. When input signals are received, the tally indicator O lights up in red.
Connects the tally signal when the controlled camera is selected as the preview. The tally indicator O lights up in green.
Note:
●When there is input of both [PGM] and [PVW] signals at
the same time, priority is given to [PGM] , and the tally indicator O lights up in red.
A part of the features can be specified according to the usage of individual users.
13