Connecting the Power Cord, Replace the cover

Getting Started

Digital Connections

This receiver is equipped with two DIGITAL IN terminals—one digital coaxial terminal and one digital optical terminal.

You can connect any component to one of the digital terminals using a digital coaxial cable (not supplied) or digital optical cable (not supplied).

Digital coaxial cable

Digital optical cable

IMPORTANT:

•When connecting a video component using the digital terminal, you also need to connect it to the video jack on the rear. Without connecting it to the video jack, you cannot view the playback picture.

•After connecting the components using the DIGITAL IN terminals, correctly set the following if necessary:

–Set the digital input (DIGITAL IN) terminal setting correctly. For details, see “Selecting the Digital Input Terminals—DIGITAL IN” on page 14.

–Select the digital input mode correctly. For details, see “Selecting the Analog or Digital Input Mode” on page 15.

Rear panel

Connecting the Power Cord

Before plugging the power cord into an AC outlet, make sure that all connections have been made.

Plug the power cord into an AC outlet.

Keep the power cord away from the connecting cables and the antenna. The power cord may cause noise or screen interference. We recommend that you use a coaxial cable to connect the antenna, since it is well-shielded against interference.

CAUTIONS:

•Do not plug in before setting the voltage selector switch on the rear of the unit and all connection procedures are complete.

•Do not touch the power cord with wet hands.

•Do not pull on the power cord to unplug the cord. When unplugging the cord, always grasp the plug so as not to damage the cord.

Putting Batteries in the Remote Control

Before using the remote control, put two supplied batteries first.

•When using the remote control, aim the remote control directly at the remote sensor on the front panel.

1 On the back of the remote control, remove the battery cover.

2 Insert batteries.

When the component has a digital coaxial output terminal, connect it to the DIGITAL 1 (DVD) terminal, using the digital coaxial cable (not supplied).

When the component has a digital optical output terminal, connect it to the DIGITAL 2 (CD) terminal, using the digital optical cable (not supplied).

Before connecting a digital optical cable, unplug the protective plug.

Notes:

DIGITAL 1 (DVD)

DIGITAL 2 ( CD )

DIGITAL IN

• Make sure to match the polarity:

(+) to (+) and (–) to (–).

3 Replace the cover.

If the range or effectiveness of the remote control decreases, replace the batteries. Use two R6P(SUM-3)/AA(15F) type dry- cell batteries.

CAUTION:

Follow these precautions to avoid leaking or cracking cells:

• Place batteries in the remote control so they match the polarity:

(+) to (+) and (–) to (–).

• Use the correct type of batteries. Batteries that look similar may

differ in voltage.

• Always replace both batteries at the same time.

•When shipped from the factory, the DIGITAL IN terminals have been set for use with the following components:

–DIGITAL 1 (coaxial): For DVD player

–DIGITAL 2 (optical): For CD player

•When you want to operate the CD player or CD recorder using the COMPU LINK remote control system, connect the target component also as described in “Analog Connections” (see page 7).

•When you want to operate the DVD player using the AV COMPU LINK remote control system, connect the DVD player also as described in “Analog Connections” (see page 8).

• Do not expose batteries to heat or flame.

RX-5030VBK specifications

The JVC RX-5030VBK is a remarkable stereo receiver that exemplifies quality and versatility, catering to both music enthusiasts and casual listeners. Launched as part of JVC's esteemed audio line-up, this model combines classic design with modern technology to deliver powerful audio performance.

One of the key features of the RX-5030VBK is its robust power output. The receiver boasts 100 watts per channel, ensuring that it can drive a wide range of speakers and fill any room with rich, immersive sound. This level of power is essential for providing clear audio even at higher volumes, making it suitable for everything from relaxed listening sessions to lively gatherings.

The RX-5030VBK also includes a variety of connectivity options, allowing for seamless integration with multiple audio sources. It features multiple stereo inputs, including phono, which is a bonus for vinyl lovers who appreciate the warmth and depth of analog sound. Additionally, the device includes inputs for CD players, cassette decks, and other auxiliary devices, making it a versatile addition to any home audio setup.

Modern technology is also present in this receiver with its built-in AM/FM tuner, giving users access to a wide range of radio stations. The digital tuner offers easy station tuning and preset memory options, ensuring quick access to favorite channels. Furthermore, the receiver is designed with user-friendly controls, making navigation straightforward, even for those who may not be tech-savvy.

Another standout characteristic is the RX-5030VBK's functionality with home theater systems. This stereo receiver can enhance the audio experience when paired with compatible surround sound setups, offering a more immersive experience for movies and games. Its versatility makes it an ideal choice for those looking to enhance their entertainment systems without needing multiple separate components.

In conclusion, the JVC RX-5030VBK showcases a harmonious blend of power, versatility, and user-friendliness. With its impressive sound output, multiple connectivity options, and modern features, it stands out as a reliable choice for anyone seeking to elevate their audio experience. Whether you're spinning vinyl, tuning into your favorite radio station, or enjoying a movie night, the RX-5030VBK delivers quality sound that meets a variety of listening needs.

JVC RX-5030VBK manual Connecting the Power Cord, Putting Batteries in the Remote Control

Models: RX-5030VBK